Rehau ABS edgebanding 315608-326 is an ABS edge banding from Rehau, Inc. that finishes raw panel edges so they present as a completed surface in cabinet and woodworking projects. The 15/16 inch nominal width covers typical panel thickness while giving a small tolerance band, which helps installers visually center the strip before final trimming. The 1.2mm thickness adds a defined edge profile that can be machined and flushed, supporting consistent lines across multiple panels. The LE CP60438 designation identifies the specific decor match, allowing shops to pair this banding with the coordinated surface material in repeat work. The embossed lacquer finish noted in the description provides a textured, coated surface, which supports a uniform look along the edge next to the face material. The 600 foot length reference supports longer production runs where a single run of material reduces changeovers.
The 15/16 inch size listed in the SAP description provides slight coverage beyond most panel thicknesses, giving room for trimming tools to create a flush edge without risking reveal of the substrate. The 1.2mm thickness supports stable handling during pressing and trimming because it is thick enough to resist buckling along the edge line. As an ABS edge banding, this product works within standard ABS-focused edgebanding workflows that rely on automatic or manual banders designed for thermoplastic tape. The specific LE CP60438 decor code allows installers to keep this roll clearly identified on the rack so it can be pulled quickly when that matching surface is specified on a project, helping keep runs consistent.
This Rehau ABS edgebanding, identified by manufacturer part number 315608-326, serves as edge banding on cabinetry, casework, and similar panel-based assemblies that use compatible decor surfaces. The ABS material described supports use on engineered wood panel edges where a thermoplastic strip is standard for covering exposed cores. The 15/16 inch width works along vertical cabinet sides, shelves, and door edges that fall within that edge dimension, helping maintain one banding size across a range of parts. Because the SAP description highlights LE CP60438, shops can reserve this banding for projects calling out that decor reference, aligning the edge color and texture with the matching face material. The embossed lacquer finish mentioned in the description runs along the visible edge, supporting a finished look at eye level and on higher-visibility cabinet faces.
The 1.2mm thickness in the SAP description provides a consistent material cross-section that responds predictably to trimmers and routers, which helps reduce rework when flushing edges across multiple parts. The 15/16 inch width leaves a small margin on either side of typical panel thicknesses, giving operators some tolerance during feed and press while still trimming back to a straight line. As ABS edge banding, the product works within established heat and pressure parameters for ABS-focused edgebanders, helping shops standardize settings when running similar Rehau strips. The LE CP60438 decor code gives a precise identification that can be logged on cut lists and job tickets, tying edge material directly to the specified surface so parts produced at different times still match. With the embossed lacquer finish identified, the edge texture remains consistent from piece to piece, which supports a uniform appearance on banks of cabinets and longer runs of casework.
Rehau 315608-326 is an ABS edge banding used to cover and finish exposed panel edges in cabinet and woodworking projects that call for this specific decor.
This ABS edgebanding is described as 15/16 inch wide and 1.2mm thick, giving slight overhang for trimming and a solid edge profile for machining.
The LE CP60438 code identifies the specific decor match, allowing shops to select this banding when that same decor is specified so edge and face stay coordinated.
The embossed lacquer finish provides a textured, coated surface along the edge, supporting a finished look that aligns with modern laminate-style panel faces.
The 1.2mm thickness gives enough material for routers and trimmers to work cleanly, helping produce a consistent, flush edge on cabinets and casework.
This product is described as ABS edge banding, so it aligns with tooling, temperatures, and handling workflows commonly used for thermoplastic ABS strips.
Rehau ABS edgebanding 315608-326 combines ABS material, a 15/16 inch by 1.2mm profile, and the LE CP60438 decor code to support consistent, matched edges on panel constructions. The embossed lacquer finish delivers a finished edge surface that aligns visually with compatible decor faces. With its defined dimensions and manufacturer part number, this edge banding fits into organized shop workflows where specific codes drive repeatable results across projects. For work requiring ABS edge treatment in this decor, this banding offers a clearly identified option for covering and finishing exposed panel edges.
Sold In: 1 Roll