Rehau ABS edgebanding 315608-328 is an ABS edge banding from Rehau, Inc. that covers exposed panel edges so the edge presents as a finished surface rather than raw core, which supports a more professional look on cabinets and casework. The SAP description specifying 15/16 x 1.2mm defines the banding width and thickness, so it matches common panel thicknesses and gives enough material for trimming while keeping a tight, low-profile edge. The ABS material description identifies it as a thermoplastic edging, which allows consistent machining with standard edgebanders and trimmers so installers can run predictable setups. The CP60435 reference in the description identifies a specific decor or design code, which helps shops align this edging with their chosen surface design for visual continuity across parts. The EMB LAC detail notes an embossed lacquer finish, giving the edge a textured, coated surface that visually and tactically complements many engineered panels.
The 15/16 inch width of this ABS edgebanding is selected to cover the face and a slight overhang on standard panel constructions, which supports accurate trimming and leaves a tight glue line at the edge. The 1.2mm thickness provides enough material mass for edge durability while still cutting and flushing cleanly on typical woodworking edgebanders, which helps maintain smooth transitions between the edge and the panel surface. The embossed lacquer (EMB LAC) finish called out in the description gives the banding a pre-finished surface, so once bonded and trimmed, the edge presents as a completed surface without additional finishing steps in the workflow.
The product classification as edge banding and category placement under edgebanding position Rehau ABS edgebanding 315608-328 for use on exposed panel edges in cabinetry, furniture, and other woodworking assemblies that rely on sheet goods. The ABS material construction allows this edgebanding to be applied to straight panel edges that are processed through edgebanding equipment, integrating smoothly into standard shop sequences for cabinet carcasses, shelves, and partitions. The CP60435 design reference connects the edging to a specific decor, which supports use wherever that matching surface is specified, keeping doors, drawer fronts, and cases visually coordinated. The embossed lacquer finish described as EMB LAC gives the edge a finished appearance, so parts come off the line ready for fitting into installations without separate edge finishing steps.
The defined 15/16 inch width directly affects how the banding sits on a panel edge, giving enough coverage to hide the substrate and a small trimming margin, which helps installers achieve a clean, chip-free flush edge after machining. The 1.2mm thickness offers a balance between a substantial feel and efficient machining, creating an edge that can withstand normal handling while still running smoothly through trimmers and scrapers in production. The ABS material specification ensures the banding behaves consistently under heat and cutting during application, which supports repeatable setups from job to job. The 600FT length detail ties directly to workflow on larger projects, allowing extended uninterrupted runs on an edgebander, which supports consistent color and finish across many parts and reduces the need to stop and change rolls mid-job.
Rehau ABS edgebanding 315608-328 is specified at 15/16 x 1.2mm, so it covers standard panel edges with a slight trimming margin for a flush, finished edge.
Rehau 315608-328 edge banding is described as ABS, providing a thermoplastic edging that works with typical woodworking edgebanding equipment and trimming tools.
The CP60435 reference identifies a specific design code for this ABS edgebanding, helping match the edge to corresponding panel decor across a project.
The EMB LAC notation indicates an embossed lacquer finish, giving the ABS edging a textured, coated surface that looks pre-finished after trimming.
Rehau ABS edgebanding 315608-328 is listed at 600FT in length, supporting longer continuous production runs from a single roll.
The 1.2mm thickness gives enough material for a solid edge while still trimming and scraping cleanly, which supports smooth transitions between edging and panel.
The defined 15/16 x 1.2mm size, ABS material, CP60435 design reference, and EMB LAC embossed lacquer finish position Rehau ABS edgebanding 315608-328 as a practical option when matching a specific decor and running consistent edges on sheet goods. The 600FT length supports extended runs, which benefits cabinet shops and woodworking operations producing multiple parts from the same design set. For projects calling for this Rehau design code and finish, this ABS edge banding provides the dimensions and surface treatment needed to carry the chosen look across every exposed edge.
Sold In: 1 Roll