Rehau ABS edgebanding 315608-348 is an ABS edge banding designed to finish exposed edges so panels present a clean, finished line. The 15/16 inch width covers standard panel thicknesses with a bit of overhang, giving room to trim back to a precise edge. The 1.2mm thickness provides a solid edge profile that stands up to everyday handling on cabinets and similar projects. The ABS material creates a consistent, uniform surface along the edge, which supports a professional appearance across multiple panels. The designation ABS LE CP40816 EMB LAC identifies this specific color and texture combination, so matching existing runs is straightforward when repeating a job or extending an installation. Supplied in a 600ft length, this product supports longer runs and multiple units on the same job without mid-run material changes.
The stated 15/16 inch width gives installers margin beyond common panel thickness, which helps tape-fed or manual trimmers track cleanly down the edge. With 1.2mm thickness, the banding seats firmly against the substrate, so pressure application tools can drive consistent adhesion along the full run. The ABS construction works well with typical edgebanding workflows where edges are applied, trimmed, and then detailed in sequence, supporting a steady progression from raw panel to finished component. Across a 600ft coil length, the uniform size and material help maintain the same setup on machines or handheld tools from the first panel to the last on a given job.
This Rehau, Inc. ABS edgebanding falls under the Edge Banding product class, aligning it with cabinet and woodworking edge finishing tasks handled through Wurth Baer Supply. In that context, the 15/16 inch by 1.2mm format works well on panels where a full-thickness edge is wanted rather than an ultra-thin treatment, helping panels read as solid components. The ABS LE CP40816 EMB LAC identification ties this coil to a defined appearance, which is useful when finishing multiple cabinets, fixtures, or panels that need to share the same edge look. The 600ft length supports shop or field teams working through a series of parts without switching to another coil, helping maintain the same color and thickness across the entire run. Because it is ABS edge banding, it fits readily into workflows built around similar thermoplastic edge materials.
The combination of 15/16 inch width and 1.2mm thickness gives installers a predictable edge to trim and finish, which reduces rework from misaligned or under-covered edges. On straight runs, that extra width beyond the panel edge lets trimming equipment cut back to the face cleanly, so final edges read straight when doors and drawer fronts line up. The ABS material keeps the banding profile uniform from end to end, supporting steady machine feed rates and consistent visual results when panels sit side by side. The specific ABS LE CP40816 EMB LAC designation means replacement or add-on work can be tied to the same part number for visual continuity years later. With 600ft on a single coil, teams can sequence entire room sets or production batches under one setup, which supports repeatable finish quality and predictable throughput on the edgebanding stage.
Rehau ABS edgebanding 315608-348 is specified at 15/16 inch wide and 1.2mm thick, giving a slight overhang for trimming while providing a solid, full-feel edge on typical panel work.
The 1.2mm thickness creates a substantial edge profile, so after trimming, doors and panels present a solid-looking edge that holds up visually on high-contact cabinet fronts.
The ABS LE CP40816 EMB LAC designation identifies the specific appearance of this ABS edgebanding, which helps match existing installations or coordinate multiple components on the same project.
The 600ft length allows long runs of edgebanding on multi-piece jobs, keeping the same thickness and appearance across many panels without changing to a different coil.
The ABS construction provides a consistent, uniform edge surface that works well with typical edgebanding application and trimming workflows in cabinet and woodworking production.
The 15/16 inch width gives slight overhang past common panel thicknesses, so trimming tools can cut back to the face cleanly, leaving a straight, finished edge.
The 15/16 inch by 1.2mm sizing, ABS construction, and defined ABS LE CP40816 EMB LAC appearance position Rehau ABS edgebanding 315608-348 as a practical choice when a solid, consistent edge is needed across multiple panels. The 600ft length supports extended runs using the same material, which benefits both shop production and on-site work that depend on uniform color and thickness. For projects routed through Wurth Baer Supply, this specific Rehau, Inc. edge banding delivers known dimensions and a repeatable look that aligns well with cabinet, furniture, and similar woodworking tasks where edge quality is an important part of the finished result.
Sold In: 1 Roll