Rehau ABS edgebanding 315608-369 gives cabinet and furniture parts a finished edge using ABS edge banding sized for common board thicknesses. The 15/16 inch width covers standard panel edges, so exposed substrates are hidden and edges present as a continuous surface. The 1.2mm thickness provides a substantial band, supporting a solid edge profile after trimming and flushing. As an ABS LE CP21113 EMB LAC product, it is specified for professional woodworking applications where consistent color and texture across long runs support uniform casework. The edge banding format allows straight-line application along cabinet sides, shelves, and doors, so installers can match edges to finished faces in a single pass. Supplied under manufacturer part number 315608-369 by Rehau, Inc., it aligns with shop documentation and cut lists that reference this exact identification for repeat work.
This ABS edge banding in 15/16 inch width is sized to span typical casework panel thicknesses, so installers can center the strip and still have enough excess for trimming without exposing the core. The 1.2mm thickness supports common application workflows using standard edge banders or manual processes that trim and scrape the band flush. Because the product is identified as ABS LE CP21113 EMB LAC, finish and texture are controlled within that specification, which helps maintain a consistent look where multiple edges meet. Referencing part 315608-369 during layout and cutting supports accurate material pulls from shop inventory when preparing runs of doors, drawer fronts, or shelves.
This Rehau ABS edgebanding, classified as edge banding in the Miscellaneous|Edgebanding category, is intended for finishing exposed edges on cabinet and furniture components in woodworking environments. The 15/16 inch width gives coverage for edges on panels built from standard sheet goods, so face and back can be slightly proud during application and then trimmed back without risking show-through. The 1.2mm thickness is well suited to vertical cabinet sides, shelves, and door edges where a more substantial ABS layer supports everyday contact in kitchens, commercial casework, or shop fixtures. Because the SAP description defines it as ABS LE CP21113 EMB LAC, it aligns with projects that call out this same finish code on drawings, allowing casework edges to visually coordinate with matched surfaces specified under that reference.
The combination of 15/16 inch width and 1.2mm thickness on this ABS edgebanding gives installers working tolerance during edge application, so slight panel variances can be managed while still producing a straight, flush edge. The ABS material type works with equipment and tooling set up for ABS edge banding, so feed speeds, trimming knives, and scraper settings can be dialed in based on known ABS behavior. Using the exact manufacturer part number 315608-369 for ordering and job staging supports repeatable results, because every roll under that identifier shares the same ABS LE CP21113 EMB LAC specification. That consistency allows production teams to maintain uniform color and surface from one project run to the next when this code is written into shop standards and cut lists.
Rehau ABS edgebanding 315608-369 is described as 15/16 inch wide and 1.2mm thick, providing coverage for typical panel edges while leaving enough material for trimming and finishing.
This 315608-369 edgebanding is made from ABS, giving shops an ABS edge treatment suited to equipment and tooling set for ABS edge banding workflows.
The 1.2mm thickness on this ABS edgebanding provides a solid edge layer, allowing trimming and light profiling while still protecting the board edge during normal cabinet use.
The ABS LE CP21113 EMB LAC designation specifies the finish and texture, helping production match this edgebanding to panels and laminates that use the same code in project documents.
The 315608-369 part number clearly identifies this Rehau ABS edgebanding, simplifying reordering and inventory pulls for repeat projects that rely on this exact finish.
This ABS edgebanding, categorized as edge banding for woodworking, serves cabinet and furniture projects that specify ABS LE CP21113 EMB LAC edges on exposed panel sides.
Rehau ABS edgebanding 315608-369 brings together a 15/16 inch width, 1.2mm thickness, and ABS LE CP21113 EMB LAC specification, so cabinet and furniture shops can align edge treatment with detailed project documents. Using this exact manufacturer part number supports consistent color, texture, and fit from one run to the next, whether you are building new casework or repeating a proven design. Select Rehau ABS edgebanding 315608-369 when your drawings and cut lists call out this finish and size, and keep edge details aligned with the rest of your ABS-based program.
Sold In: 1 Roll