Rehau ABS edgebanding 315608-371 15/16x1.2mm ABS

Rehau ABS Edgebanding 315608-371 For Clean Edges

Rehau ABS edgebanding 315608-371 is an ABS edge banding product from Rehau, Inc. that finishes exposed panel edges so cut substrates transition to a defined, protected edge. The 15/16 inch width stated as 15/16X1.2MM in the SAP description covers common panel thicknesses with a slight overhang so edges can be trimmed flush for a straight, uniform finish. The 1.2mm thickness provides a substantial edge profile that helps visually match thicker faces while giving the edge more presence than ultra-thin tape. The ABS material specified in the product name forms a rigid, workable edging that responds well to standard edgebanding equipment in woodworking shops. The LE CP41476 EMB LAC reference in the SAP description identifies the decor and lacquered surface so installers can align this edge banding with matching board or laminate for consistent appearance across cabinet or furniture runs.

Key ABS Edge Banding Details For Daily Work

• The product class listed as Edge Banding defines this as a dedicated solution for covering raw panel edges, so shop crews can assign it directly to carcass, shelf, and door edge operations without repurposing other materials.
• The ABS material called out in the product name gives a stable, machinable edging that works with common trimming and scraping tools, supporting predictable clean-up passes after application.
• The 15/16X1.2MM size from the SAP description pairs a near-inch face width with 1.2mm thickness, giving enough material for slight overhang, trimming, and consistent edge reveal on standard panel builds.
• The LE CP41476 EMB LAC identifier in the SAP description ties this roll to a specific finish and emboss, helping production match panel decor codes so doors, drawer fronts, and cases read as one coordinated surface.
• The manufacturer part number 315608-371 provides a precise reference for reordering and job documentation, reducing the chance of mixing close but different finishes across phases of a project.
• The Web Description tag WBSC - 1432 - RU315608-371 connects this item to Wurth Baer Supply's internal system, supporting straightforward quoting and job costing when building cut lists and material pull sheets.

Size And Material Details For Edgeband Setup

The SAP description 15/16X1.2MM ABS LE CP41476 EMB LAC 600FT states the edgeband width and thickness, so equipment can be set up to feed a 15/16 inch wide, 1.2mm thick ABS strip through edgebanders and trimmers. The ABS designation in both the product name and description confirms a thermoplastic edging suited to the Edge Banding product class, giving operators confidence when setting heat, pressure, and feed parameters around that material type. The 600FT length reference in the description defines a long continuous run that supports extended edging passes on larger cabinet or fixture jobs without frequent roll changes, which helps maintain consistent settings and rhythm on the line.

How This Rehau ABS Edge Banding Fits Real Jobs

Using 15/16X1.2MM ABS On Panel Edges

The Category notation Miscellaneous|Edgebanding and Product Class Edge Banding position this Rehau, Inc. product specifically for finishing exposed edges on wood-based panels in woodworking applications. The 15/16X1.2MM dimension from the SAP description pairs well with panels where the near-inch face width gives coverage across the thickness and a small overhang, so operators can trim back to a clean, straight edge without exposing the core. The 1.2mm thickness stated in that same description creates a substantial edge that reads more like a solid component than a film, which helps when aligning with heavier laminates or thicker visual lines on contemporary cabinetry. Because the material is defined as ABS in the product name and SAP description, shops can run this edgebanding using standard ABS-capable settings on dedicated machines, integrating it into existing workflows without changing core processes. The LE CP41476 EMB LAC designation identifies the embossed and lacquered style, supporting its use anywhere a textured, finished edge is needed to visually continue a matching surface across doors, drawer fronts, and casework edges.

Details That Support Repeatable Edgeband Results

The manufacturer part number 315608-371 gives installers and production planners a single, unambiguous identifier, which matters when the same ABS edgebanding must be used across multiple batches to keep every visible edge reading the same. The Brand listing as Rehau, Inc. ties this edgeband to a recognized edge banding manufacturer, so teams working from specifications that call out that brand can align this exact ABS profile and decor to project documents. The Web Description WBSC - 1432 - RU315608-371 connects directly to Wurth Baer Supply records, which streamlines internal communication between estimating, purchasing, and the shop floor because everyone references the same code. The SAP description phrase ABS LE CP41476 EMB LAC 600FT combines material, decor code, surface style, and length into one string, making it easier to mirror those same details on cut sheets and job labels so the correct roll is staged at the edgebander for each run. Together, these verified identifiers support consistent selection and application of the same 15/16X1.2MM ABS edge banding on every panel that calls for this finish.

Common Questions About Rehau ABS Edgebanding 315608-371

Select Rehau ABS Edgebanding 315608-371 For Your Next Run

The Product Name Rehau ABS Edgebanding, 315608-371, together with the SAP description 15/16X1.2MM ABS LE CP41476 EMB LAC 600FT, defines a specific ABS edge banding profile, size, and decor that can be aligned directly with project documents. The Category Miscellaneous|Edgebanding and Product Class Edge Banding place it squarely in everyday edge finishing tasks for woodworking shops. For projects calling for this LE CP41476 EMB LAC ABS finish on 15/16X1.2MM edges, selecting this exact Rehau, Inc. part through Wurth Baer Supply keeps edges, documentation, and future reorders tied to the same defined product.