Rehau ABS edgebanding 315608-377 is ABS edge banding designed to finish exposed panel edges in woodworking and cabinet projects. The ABS material creates a consistent, machinable edge that supports clean trimming and routing during shop work. With a width of 15/16 inch, this banding covers standard panel thicknesses while giving a bit of overhang for flush trimming. The 1.2mm thickness provides a solid edge profile that works well where a more substantial edge is preferred over thin tape. The LE CP60604 reference identifies the specific design match, helping align this banding with the intended surface pattern in a project layout. An EMB LAC designation identifies an embossed, lacquered surface, so the edge presents a finished look that visually coordinates with textured and coated panels. A 600-foot length supports longer runs and repeat jobs from the same material number.
This Rehau ABS edge banding uses a 15/16 inch width, giving enough coverage for standard panel thickness while leaving material for trimming operations. The 1.2mm thickness produces a more substantial edge that responds well to flush trimming and light profiling on edgebanders. The embossed, lacquered (EMB LAC) surface behaves like a finished face during handling and machining, helping maintain a consistent appearance through cutting and buffing steps. With LE CP60604 noted in the description, installers can align this banding with matching decor panels during layout, reducing visual mismatch at finished cabinet fronts. The 600-foot roll length supports continuous feeding on edgebanding equipment, helping minimize changeovers on production-oriented jobs.
This ABS edgebanding from Rehau, part number 315608-377, fits applications where exposed panel edges on cabinets, fixtures, or furniture need a finished, coordinated look. The 15/16 inch width works with common casework panel dimensions, giving coverage for vertical cabinet sides, shelves, and door edges. The 1.2mm thickness supports use on edges that see handling, such as cabinet doors and drawer fronts, where a more solid edge profile is desirable. The LE CP60604 decor reference positions this banding for projects using that specific design family, helping maintain visual continuity between faces and edges across built units. Because the material is ABS, it works within typical shop environments that use thermoplastic edgebanding for laminate or board-based constructions.
The 15/16 inch width gives consistent trim allowance across multiple passes, which helps produce repeatable flush edges on long cabinet runs. The 1.2mm thickness creates a predictable profile for edgebander settings, aiding in dialing in cutter heads and pressure wheels once and running a full 600-foot roll with minimal adjustment. The embossed, lacquered finish (EMB LAC) means the surface texture and sheen are built into the banding, so once trimmed and buffed the edge presentation remains aligned with the intended decor. Using the specific LE CP60604 identifier helps keep replacement or add-on work visually consistent by tying back to the same design reference. The extended 600-foot length provides enough material to handle multi-unit jobs under a single manufacturer part number 315608-377, supporting consistent results across original builds and later expansions.
Rehau 315608-377 edgebanding is made from ABS, giving a thermoplastic edge material that works with standard edgebanding machinery and supports clean trimming on cabinet and panel projects.
Rehau ABS edgebanding 315608-377 has a width of 15/16 inch, providing coverage over typical panel edges while leaving enough overhang for accurate flush trimming during installation.
The Rehau 315608-377 ABS edge banding is 1.2mm thick, creating a more substantial edge that supports machining and profile consistency on frequently handled cabinet edges.
LE CP60604 identifies the specific decor reference for this Rehau ABS edgebanding, helping match the edge appearance to panels using the same design within a project.
On Rehau 315608-377, EMB LAC indicates an embossed, lacquered surface, giving the edge a textured, finished look that coordinates with compatible panel faces.
Rehau ABS edgebanding 315608-377 is supplied in a 600-foot length, supporting extended runs and multi-cabinet projects from a single material reference.
Rehau ABS edgebanding 315608-377 combines a 15/16 inch width, 1.2mm thickness, and ABS construction to support straightforward machining on cabinet and panel edges. The LE CP60604 decor reference and EMB LAC embossed, lacquered surface tie the edge visually to matching surfaces. With a 600-foot length under manufacturer part number 315608-377, this banding supports consistent results across initial installations and follow-up work that rely on the same design and dimensions.
Sold In: 1 Roll