Rehau ABS edgebanding provides an ABS edge banding solution for finishing exposed panel and cabinet edges, so installers can cover raw board edges with a consistent trim material instead of leaving core material visible on completed work.
The 15/16 inch width gives coverage beyond standard 3/4 inch panel thickness, allowing a small overhang at top and bottom that can be trimmed flush for a straight, professional edge on cabinetry or casework.
The 1.2mm thickness adds a substantial edge profile compared with thin tape-style products, which supports a solid-feeling edge that holds up well when panels are handled or when doors and fronts are opened and closed repeatedly.
The ABS material creates a uniform, machinable edge strip that can be processed using typical edgebanding equipment, helping shops keep a steady workflow when running cabinet parts or furniture components.
The manufacturer part number 315608-386 identifies this exact color and finish combination within the Rehau line, so shops can match it across repeat jobs or service work where the same edge appearance is required.
The 15/16 inch profile on this Rehau ABS edgebanding gives installers enough edge coverage to run parts through standard edgebanders and then trim back to a flush face, which supports clean corners and consistent reveals on cabinets and panels.
The 1.2mm thickness works well with common edgebanding trimming and scraping stations, letting tooling create a defined edge radius while still leaving enough material to avoid cutting through to the substrate during finish passes.
The ABS LE CP10100 EMB LAC specification in the description identifies a particular combination of ABS material, embossed effect, and lacquer-related finish, so the edging behaves predictably during machining and finishing steps in a production sequence.
The 600ft length in a single run reduces interruptions on the edgebander, which supports smoother throughput when processing batches of cabinet parts or longer production runs for commercial casework.
This Rehau ABS edgebanding, identified by manufacturer part number 315608-386, serves projects that call for an ABS edge banding solution matched to the ABS LE CP10100 EMB LAC description, so fabricators can deliver repeatable edge appearance across related jobs.
The 15/16 inch by 1.2mm sizing suits cabinet, furniture, or casework components built from panels around 3/4 inch thick, because the width allows slight overhang for trimming and the thickness creates a noticeable, durable edge profile on doors, sides, and shelves.
The embossed reference in the description positions this edging for applications where a textured edge is preferred, helping the banding visually coordinate with decorative laminates or surfaces that are designed with pattern or structure.
The lacquer-related aspect in the description supports uses where a controlled sheen level along the edge is important to the finished look, so designers and shops can target a specific visual result for visible cabinet and furniture fronts.
The 600ft length aligns with shop environments handling multiple cabinets or full room layouts, because a single roll can support many parts in one run, which helps reduce downtime and keeps the edgebander set up on a single color and finish combination.
The combination of 15/16 inch width and 1.2mm thickness on this ABS edgebanding supports consistent trimming passes, because operators can remove overhang while leaving enough material to form a controlled radius that feels smooth along door and panel edges.
The ABS LE CP10100 identification ties the edging to a specific formulation and appearance, so shops running repeat programs can rely on this same reference to maintain a stable look from one production batch to the next.
The EMB notation in the description means the surface has an embossed element, which helps the edging diffuse light differently than a flat surface, giving installers a way to maintain a coordinated texture between the edge and the chosen board surface.
The LAC notation points to a lacquer-related finish aspect on the edging, which contributes to predictable sheen when panels and fronts are lined up, helping avoid a mismatch between edge appearance and the rest of the visible surface in finished installations.
The full ABS Edgebanding 600ft roll length supports longer uninterrupted production sequences, so once the edgebander is dialed in for this 15/16 x 1.2mm profile, operators can maintain those settings across large part counts without frequent material changes.
The clear manufacturer and SAP descriptions, such as 15/16X1.2MM ABS LE CP10100 EMB LAC 600FT and WBSC - 1432 - RU315608-386, help purchasing and production staff reference the same edging, which supports accurate reordering and consistent job documentation.
Rehau ABS edgebanding 315608-386 is described as 15/16 inch by 1.2mm, providing coverage past typical 3/4 inch panels and a thicker edge that trims cleanly during edgebanding operations.
This ABS edgebanding carries the ABS LE CP10100 EMB LAC description, indicating a specific ABS type, embossed surface character, and lacquer-related finish for a defined texture and sheen.
This Rehau ABS edgebanding is identified as 600ft in length, supporting extended production runs or multiple cabinet projects from a single continuous roll of edging material.
The 1.2mm thickness on this ABS edge banding creates a substantial edge that trims well and provides a defined profile on cabinet doors, shelves, and casework components.
The 15/16 inch width gives slight overhang on 3/4 inch panels, allowing trimming tools to create flush, clean edges without exposing the underlying panel core.
Part number 315608-386 uniquely identifies this Rehau ABS edgebanding color and finish, helping shops reorder the same edging for matching work or repeat projects.
This Rehau ABS edgebanding, specified as 15/16X1.2MM ABS LE CP10100 EMB LAC 600FT with part number 315608-386, gives shops a consistent ABS edge banding option for finishing panel and cabinet edges, supporting clean trimming and repeatable visual results across projects.
Sold In: 1 Roll