Rehau ABS edgebanding defines this product as an ABS plastic edge banding from Rehau, Inc., so it serves as a dedicated solution for finishing raw panel edges in cabinet and furniture construction. The 15/16 inch width stated in the SAP description gives coverage beyond a standard 3/4 inch panel, allowing trimming down to a clean flush edge in typical casework. The 1.2mm thickness described in the same line provides a substantial edge profile, supporting a more solid feel at doors and shelf fronts compared with thin tape-style edges. The material being ABS, as called out in the SAP description, creates a uniform, machinable edge that works well with common woodworking tools during trimming and finishing. The 600ft length noted in the SAP description offers extended run capacity, which reduces changeovers during larger jobs and helps keep edge color consistent across many parts.
The 15/16 inch width given in the SAP description provides intentional overhang beyond common panel thicknesses, which supports edge band alignment during pressing and allows post-trimming back to the substrate for a tight glue line. The 1.2mm thickness noted in the same description creates a defined edge radius when shaped, influencing knife or router settings during finishing passes. The product being ABS edge banding, as stated in the SAP description, means the material responds consistently under trimming blades, helping maintain a straight edge without tearing. The 600ft length called out in the SAP description means a single coil can service multiple cabinets or rooms, supporting uninterrupted runs on edgebanding equipment.
The product class listed as Edge Banding identifies this Rehau ABS edgebanding as a finishing material for exposed edges on panels and components. The 15/16 inch width from the SAP description aligns with edging for cabinet sides, shelves, and doors derived from 3/4 inch stock, giving enough coverage for slight panel size variations. The 1.2mm thickness noted in the SAP description suits fronts and visible edges where a more pronounced edge line is desired, supporting a consistent look across doors and case parts. The ABS designation in the SAP description places this product within plastic-based edge materials commonly used in modern cabinet and fixture work, so it integrates naturally into shops already set up for machining thermoplastic edges. The 600ft length referenced in the SAP description supports multi-piece projects such as full kitchens or banked office casework, so a single roll can carry a consistent edge tone throughout a grouped installation.
The 15/16 inch by 1.2mm size defined in the SAP description sets clear expectations for both coverage and profile, helping installers dial in trimmer settings and edge profiles once and run repeat parts with minimal adjustment. The ABS material called out in the SAP description provides a stable cutting surface, so knives and routers interact with a predictable substrate and maintain edge quality as production progresses. The product being classified as Edge Banding indicates its role at the detail stage of panel fabrication, where accurate dimensions and consistent material response reduce rework on visible faces. The manufacturer part number 315608-387 ties these dimensions and material characteristics to a fixed specification, which supports returning to the same edgebanding on future phases or repairs to maintain a uniform appearance. The 600ft length identified in the SAP description gives planners a known yield per roll, which helps align coil usage with cut lists when scheduling production runs.
Rehau ABS edgebanding 315608-387 is identified in the SAP description as ABS, providing a plastic edge material that machines cleanly during trimming and finishing.
Rehau ABS edgebanding 315608-387 is listed as 15/16 inch wide by 1.2mm thick, giving overhang for trimming and a substantial edge profile on typical panel work.
Rehau ABS edgebanding 315608-387 is specified in the SAP description at 600ft in length, supporting extended production runs on cabinet and furniture projects.
The product class Edge Banding and ABS material identify Rehau 315608-387 as a finishing edge for panel-based cabinet, furniture, and similar woodworking projects.
The 15/16 inch width exceeds standard 3/4 inch panel thickness, giving installers trimming margin to achieve a flush, clean edge across doors and case parts.
The 1.2mm thickness on Rehau 315608-387 creates a more defined edge profile, helping visible fronts feel substantial after trimming and finishing.
This Rehau ABS edgebanding, identified by manufacturer part number 315608-387, combines a 15/16 inch width, 1.2mm thickness, and 600ft length as specified in the SAP description to support efficient edging of multiple panel components. The ABS material and Edge Banding product class confirm its role as a dedicated edge solution for cabinet and furniture work, giving shops a repeatable specification to match across current and future projects.
Sold In: 1 Roll