Rehau ABS edgebanding 315608-427 is ABS edge banding designed to finish exposed panel edges on woodworking and cabinet jobs. The 15/16 inch width covers typical panel thickness with a small overhang, giving room to flush-trim for a straight edge. The 1.2 mm thickness adds a substantial edge profile, which helps the band stand up to normal shop handling and everyday use. The ABS material forms a plastic edge, so cut edges are protected from direct contact with the substrate. The CP41525 reference in the description identifies the matched design series, which helps align this banding with its intended decorative surface in production work. The DCOGLS notation indicates a decor gloss look, so the edge can visually track with a gloss-style face material. A 600 FT length supports longer runs and multiple cabinet or fixture projects without frequent roll changes.
This Rehau ABS edgebanding uses a 15/16 inch width, so it spans typical panel thickness with room left for trimming, which supports tight, chip-free edges. The 1.2 mm thickness gives the edge enough body for standard routing and scraping without feeling fragile during handling. The ABS plastic construction provides an engineered edge surface that works with common edgebanding equipment and downstream sanding and cleaning steps. The CP41525 and decor gloss indicators identify the intended visual program, which helps keep setup choices consistent when aligning edging with matching surfaces across a job.
The Rehau, Inc. ABS edgebanding identified as 315608-427 is part of the edge banding product class, so it is meant for closing off raw panel edges in woodworking environments. The 15/16 inch width offers coverage for common cabinet-grade substrates, which helps when applying the banding along doors, shelves, and vertical panels. Because the banding is 1.2 mm thick, it creates a defined edge that stands out cleanly once trimmed, which suits visible locations such as cabinet fronts and exposed carcass sides. The ABS material works as a dedicated edge layer, separating the decorative edge from the panel core during routine use. The CP41525 and decor gloss design notes point this banding toward gloss-oriented builds, which can be important when creating banks of cabinets or fixtures where all exposed faces and edges need to present the same sheen.
The combination of 15/16 inch width and 1.2 mm thickness on this Rehau ABS edgebanding 315608-427 gives installers latitude during trimming, which helps reduce the risk of exposing substrate at the corner. A slightly over-wide band allows final passes with trimmers or scrapers to bring the edge perfectly flush, which improves the feel of door and panel edges. The 1.2 mm thickness also provides enough material for a smooth radius or light edge break without cutting through the decorative layer. The decor gloss characteristic supports projects that use higher-sheen surfaces, so the edge reads correctly against nearby faces under finished lighting. With a 600 FT roll, this edgebanding can run through extended production cycles, which helps maintain appearance continuity across large orders or multi-room installations that follow the same CP41525 design standard.
Rehau ABS edgebanding 315608-427 has a 15/16 inch width, which covers typical panel thickness with a small overhang so edges can be trimmed back for a clean, flush finish.
This edge banding is 1.2 mm thick, giving a substantial edge that supports routing and scraping while maintaining a defined profile on cabinet and panel projects.
The 315608-427 product is ABS edgebanding, so it forms a plastic edge layer over the substrate, protecting the panel core along exposed edges during normal use.
CP41525 is part of the product description that identifies the associated decorative program, helping shops match this edging to the intended surface design in production work.
This Rehau ABS edging is specified at 600 FT, supporting longer production runs and multiple cabinet or fixture jobs from a single roll in the shop.
The decor gloss notation indicates a gloss-style appearance, so the edging can visually track with gloss decorative surfaces in cabinet and panel installations.
Rehau ABS edgebanding 315608-427 combines a 15/16 inch width, 1.2 mm thickness, ABS construction, CP41525 design reference, and decor gloss appearance to support matched edge work on gloss-oriented projects. The 600 FT length serves production and repeat builds. Choose this edge banding when those dimensions and design markers fit the cabinet or panel run you are setting up.
Sold In: 1 Roll