Rehau ABS edgebanding 315608-428 is ABS edge banding that finishes exposed panel edges so cut board edges are covered and visually matched. The 15/16 inch width spans typical panel thickness with a margin, giving coverage over both faces for a clean, consistent edge line. The 1.2 mm thickness builds a solid edge profile, so finished boards have a substantial edge instead of a razor-thin strip that can look out of scale on cabinet and furniture parts. The CP41526 reference in the description identifies the specific design or decor, which helps align this tape with the intended panel or laminate series during layout and cutting. The DCOGLS notation in the description shows that this banding is tied to a defined decor or gloss level, so repeated runs of parts keep the same visual character across multiple jobs.
The stated 15/16 inch width on this Rehau ABS edgebanding gives a workable amount of overhang on common panel thicknesses, which supports typical banding workflows that rely on trimming equipment to finish edges flush. The 1.2 mm thickness offers a stable profile for trimmers and routers, so cutting tools track more predictably along doors, drawer fronts, and case parts during edge finishing. As an ABS edge banding from Rehau, Inc., this product aligns with shop setups built around ABS materials, which helps keep machining behavior consistent from panel processing through final edge treatment. The 600 FT length noted in the description supports extended runs on edgebanders, so operators can move through sequences of parts with fewer roll changes and more continuous machine time on a given program.
This Rehau, Inc. ABS edgebanding in product class Edge Banding is intended for finishing the exposed edges of panel-based components in cabinetmaking and related woodworking. The 15/16 inch width aligns with panels that need full edge coverage on both faces, so cabinet sides, shelves, and tall panels can move from saw to edgebander to final trim without complex width changes. The 1.2 mm thickness supports use on visible fronts such as doors and drawer faces, where a slightly thicker edge can better match the visual weight of surrounding lines. With identifiers like CP41526 and DCOGLS, the banding connects to a defined decor and surface style, which makes it suitable for coordinated installations where casework, fronts, and trim pieces share a common look. The 600 FT length serves shops running batches of similar parts, since longer rolls can stay on the machine through nested or lineal runs without constant refitting.
The 15/16 inch width combined with 1.2 mm thickness of this ABS edge banding affects both appearance and processing, because the tape fully covers panel edges while leaving enough material for clean trimming. That coverage means cut edges on cabinet sides, tops, and shelves present a uniform finished strip instead of exposed core, which supports visually consistent installations across banks of cabinets or fixture runs. As an ABS edgebanding identified by manufacturer part number 315608-428, it provides a specific, repeatable choice, so when a shop reorders the same number, the appearance and dimensions stay aligned with earlier jobs. The CP41526 and DCOGLS notes tie the banding to a defined decor and surface character, which helps designers and production teams keep edge treatment synchronized with matching boards in a selected program. The 600 FT reference in the description influences machine scheduling, since a longer roll allows more doors, drawer fronts, and case parts to be processed in a single setup, supporting steadier throughput on edgebanders and related trimming stations.
Rehau ABS edgebanding 315608-428 is ABS edge banding from Rehau, Inc. used to finish exposed edges on panel components so board cores are covered and visually matched.
Rehau ABS edgebanding 315608-428 has a width of 15/16 inch, allowing full coverage of common panel edges with extra material for trimming to a flush finished edge.
The 1.2 mm thickness on this ABS edgebanding builds a more substantial edge, giving doors, drawer fronts, and case parts a solid-feeling perimeter after trimming.
The 600 FT length provides a long run of tape, supporting extended edgebander operation on batches of cabinet or furniture parts with fewer roll changes.
CP41526 and DCOGLS in the description identify a specific decor and surface character, helping align this banding with matching panel or laminate selections.
The manufacturer part number 315608-428 provides an exact reference, so future orders can repeat the same ABS edgebanding design, width, and thickness across projects.
This Rehau ABS edgebanding 315608-428 combines 15/16 inch width, 1.2 mm thickness, and a defined CP41526 DCOGLS decor to deliver consistent edge treatment on panel components. Using the specific 315608-428 part number ties projects to a known appearance and dimension set, which supports repeatable cabinet, furniture, and fixture runs. The 600 FT length described in the product data helps sustain longer edgebander sessions on coordinated work. For panel-based builds that call for this design and size, this ABS edge banding provides a defined option ready to align with your existing layouts and machining setups.
Sold In: 1 Roll