Rehau ABS edgebanding 315608-437 is an ABS edge banding designed to cover and protect raw panel edges, so cabinet and furniture projects present a finished, uniform line instead of exposed core. The 15/16 inch width gives coverage over common 3/4 inch panels, providing slight overhang for trimming to a tight, flush edge. The 1.2mm thickness adds a defined edge profile, which helps panels resist everyday edge impacts in typical woodworking environments. This ABS material supports consistent machining with standard edgebanders, helping runs stay predictable from start to finish. The CP21148 reference in the description identifies the specific decor match, supporting visual consistency across doors, drawer fronts, and casework. The embossed lacquer surface gives the banding a textured finished face, so the visible edge coordinates with the intended surface appearance rather than looking flat or unfinished.
This ABS edge banding uses a 15/16 inch width that works well when covering the face of standard 3/4 inch sheet goods, giving slight overage for trimming to a precise final edge. The 1.2mm thickness provides enough material for clean trimming passes without feeling overly bulky at the panel perimeter. As an ABS edge banding, it is suited to application on compatible edgebanding machines using appropriate adhesives, supporting standard shop workflows. The CP21148 designation and embossed lacquer finish define the appearance of the finished edge, which helps installers line up this banding with the intended surface decor during layout. The 600 ft length referenced in the description supports extended edgebanding runs, reducing roll changes during repetitive cabinet or fixture production.
This Rehau, Inc. ABS edge banding is part of the edgebanding category, so it is intended for covering exposed panel edges in cabinet, furniture, and fixture construction. The 15/16 inch width works with common 3/4 inch composite panels used in casework, doors, and shelves, giving enough edge coverage to trim back to a clean line. At 1.2mm thick, the banding adds a defined edge that supports everyday handling of cabinet fronts and sides. The CP21148 decor reference connects this product to a specific design family, which helps projects maintain a consistent look across verticals, horizontals, and small components. The embossed lacquer surface creates a textured finish on the visible edge, aligning the edge appearance with coordinated surfaces in the same decor. With a 600 ft length in the description, this banding serves well in production shops that run repeated cabinet sizes or multiple jobs in the same finish.
The ABS material used in this edge banding is suited to routing and trimming, which helps installers achieve repeatable edge quality across many panels. The 15/16 inch width offers workable tolerance when initially applying the band, reducing the risk of under-coverage on panels cut slightly oversize. The 1.2mm thickness provides stability during trimming operations, supporting straight passes without chatter along doors and side panels. The CP21148 identifier allows shops to call out the exact same banding on future orders, which helps replacement panels or added cabinets match earlier work. The embossed lacquer finish gives the edge a defined texture, helping joints and corners present a deliberate, finished look rather than a raw plastic sheen. By combining specific width, thickness, decor code, and finish, this Rehau ABS edgebanding supports consistent appearance and handling across small custom jobs and repeated production runs.
The Rehau ABS edgebanding 315608-437 is described as 15/16 inch wide and 1.2mm thick, so it covers typical 3/4 inch panels with extra material for trimming to a flush finished edge.
The 1.2mm ABS thickness provides a more substantial edge, which supports clean trimming and helps panel edges handle normal contact in cabinet and furniture use.
The CP21148 reference in the description identifies the specific decor for this ABS edgebanding, helping projects match edge appearance with corresponding panel surfaces.
The Rehau 315608-437 edgebanding has an embossed lacquer surface, giving the visible edge a textured finished look that coordinates with its intended decor.
The SAP description lists this ABS edgebanding as 600 ft, providing enough length for extended cabinet, furniture, or fixture edgebanding runs in the same decor.
This ABS edge banding, classified as edgebanding, is suited to covering exposed edges on cabinet, furniture, and casework panels where a matched, finished edge is required.
The Rehau ABS edgebanding 315608-437 combines a 15/16 inch width, 1.2mm thickness, and ABS construction to support dependable edge coverage on common 3/4 inch panels. The CP21148 decor reference and embossed lacquer finish define the visual match, helping cabinets and fixtures carry the same look across doors, sides, and shelves. With a 600 ft length referenced in the description, this banding suits both ongoing production and repeat work in the same finish. For projects calling for this specific decor and dimension set, Rehau ABS edgebanding 315608-437 provides a defined path to consistent, professional-looking panel edges.
Sold In: 1 Roll