Rehau ABS edgebanding 315608-465 is an ABS edge banding designed to finish exposed edges so panel projects present a clean, unified look. The ABS material creates a defined edge detail that visually completes cabinet, furniture, or fixture panels using matching components. The 15/16 inch width covers typical panel thickness and slight overhang, letting installers trim back to a crisp line after bonding. The 1.2mm thickness gives the edge a solid profile, which helps edges read as part of the panel rather than a thin tape. The designation LE CP20916 EMB LAC aligns this banding with a specific laminate or surfacing decor, supporting consistent color and texture from face to edge. The 600ft length supports longer runs or multiple jobs from a single roll, helping shops keep the same edge material across related work.
This Rehau ABS edge banding uses a 15/16 inch width, which gives installers enough coverage over standard panel thickness to route or trim the excess cleanly after bonding. The 1.2mm thickness provides a stable edge strip that tracks well through common edgebanding setups while still forming to panel edges. The ABS construction presents a defined plastic edge once applied, which pairs with the identified LE CP20916 EMB LAC decor to visually align with the matching surface material. A 600ft length per roll supports continuous feeding through edgebanders or repeated manual applications on multiple pieces without frequent material changes.
This Rehau ABS edgebanding, identified by manufacturer part number 315608-465 and the LE CP20916 EMB LAC description, is intended to coordinate with a specific decorative surface. By matching the CP20916 decor reference, the edge material aligns with the chosen laminate or surface design so casework, counters, or fixtures present the same visual story from face to edge. The 15/16 inch width lets fabricators apply it on typical panel thicknesses used in woodworking and laminate-based construction, then trim back to a flush, consistent line. The ABS composition provides a uniform plastic edge that visually links all treated sides wherever this decor is specified, supporting repeatable appearance from job to job.
The 1.2mm thickness on this ABS edgebanding gives installers enough material to machine, scrape, or lightly sand the edge without thinning it to a fragile line, which helps maintain the designed profile along cabinet fronts and case edges. The defined LE CP20916 EMB LAC identification keeps shops aligned to the same decor code when reordering, so replacement pieces or later add-on work can use the same Rehau ABS edgebanding 315608-465 and maintain visual continuity. The 600ft roll format supports longer production sequences on edge banders, allowing operators to run multiple panels or entire room sets with the same material reference. Together, the width, thickness, material, and decor code let shops tie their edge treatment directly to a known Rehau laminate system, supporting predictable visual results across finished installations.
This Rehau ABS edgebanding is 15/16 inch wide and 1.2mm thick, giving coverage for standard panel edges with enough material to trim and finish to a clean, straight profile.
The LE CP20916 EMB LAC description identifies the specific decor family this ABS edgebanding is matched to, supporting visual alignment with the corresponding laminate or surface design.
The 600ft length provides extended run time on edgebanders or manual setups, allowing multiple panels or entire projects to be edged with the same material code without frequent roll changes.
This product is ABS edgebanding, so the edge is formed from an ABS plastic strip that delivers a defined, consistent band along the panel perimeter once applied.
The 1.2mm thickness provides a solid-feeling edge profile, which supports machining and finishing steps while keeping the edge visually substantial on cabinets and casework.
The 15/16 inch width covers common panel thicknesses with slight overhang, so installers can bond, trim, and finish to a flush, uniform edge across the workpiece.
Rehau ABS edgebanding 315608-465 combines a 15/16 inch width, 1.2mm thickness, and LE CP20916 EMB LAC decor reference so edges align with the intended surface design. For shops working with this decor family, choosing this 600ft ABS edgebanding supports consistent, repeatable appearance across cabinets, fixtures, or furniture built around the same laminate system.
Sold In: 1 Roll