Rehau ABS edgebanding 315608-483 is an ABS edge banding strip designed to finish exposed edges on panels so the edge matches the surface and protects the substrate. The 15/16 inch width covers typical panel thicknesses with enough margin for trimming, which helps installers flush-trim without risking the core showing. The 1.2mm thickness gives a solid edge profile, so routed corners feel substantial rather than sharp. The ABS material forms a durable edging layer along the panel perimeter, which supports long-term use in cabinetry or furniture projects. The LE CP60251 reference in the description identifies the specific design or decor coordination for this banding, which helps match it to the correct laminated surface in a project lineup. The 600ft length noted in the description provides extended run capability, which suits higher-volume work where consistent color and profile across multiple cabinets or components is important.
The 15/16 inch width specified in the description gives installers enough overhang on common panel thicknesses, so the banding can be aligned and then trimmed clean without exposing the core. The 1.2mm thickness defined for this edgebanding produces a thicker edge profile, which responds well to standard trimming and light profiling operations at cabinet and furniture edges. The ABS material referenced in the description suits typical machining used on edge banding, which supports clean cuts during trimming and shaping. The Rehau, Inc. branding connects this edgebanding to a recognized edge banding manufacturer, which aids shops that standardize on specific edgebanding families across different colors or decors.
This product is classified as edge banding in the edgebanding category, which aligns it with projects needing finished edges on boards or panel stock. The 15/16 inch width described suits edge coverage on common cabinet and furniture panels, which keeps the face and back edges protected once trimmed. The 1.2mm thickness detailed in the description provides a robust edge layer, which is useful where doors, drawer fronts, or shelves see regular handling. The ABS material specified works as a durable edging surface on qualifying substrates, which supports its use around cabinet carcasses, shelving ends, and furniture tops that require a coordinated finish. The LE CP60251 reference in the description ties the edgeband to a specific visual program, which supports its use wherever that matching decor or surface design is already part of the job.
The 15/16 inch width listed in the SAP description gives a small but useful margin past typical panel thicknesses, which simplifies aligning the edgeband and controlling trim cuts along straight or curved runs. The 1.2mm thickness stated for this Rehau ABS edgebanding 315608-483 offers more material to work with at outside corners and radius work, which helps maintain a clean profile after routing or scraping. The ABS construction referenced in the description supports consistent machining behavior along long runs, which reduces variation in edge feel from part to part. The 600ft length noted in the SAP description means one roll can support many cabinets or fixtures, which keeps the edge color and surface look uniform across an entire installation. The manufacturer part number 315608-483 ties directly to this exact configuration, which helps repeat orders match previous jobs that used the same size and visual specification.
The Rehau 315608-483 ABS edgebanding is described as 15/16 inch wide by 1.2mm thick, which suits standard panel edges and provides enough material for trimming to a flush, solid-feeling edge.
This ABS edgebanding lists LE CP60251 in its description, which identifies the specific decor or look group so the edge can visually coordinate with matching laminated surfaces in a project.
The SAP description specifies 600ft, providing extended run capacity on a single roll so larger cabinet or furniture jobs can maintain consistent edging appearance without frequent roll changes.
The 315608-483 product is identified as ABS edgebanding, meaning it uses an ABS thermoplastic strip that forms a durable edge layer along the panel perimeter during fabrication.
This edgebanding has a 1.2mm thickness, giving a more substantial edge that handles standard trimming and light profiling while maintaining a defined profile on cabinet and furniture components.
The 315608-483 ABS edgebanding is produced by Rehau, Inc., placing it within Rehau's edge banding family for shops aligning projects around a consistent manufacturer source.
The Rehau ABS edgebanding 315608-483 pairs a 15/16 inch width with 1.2mm thickness to support clean, substantial-feeling panel edges. The LE CP60251 designation and ABS construction align this edgeband with coordinated decorative surfaces and typical machining. The 600ft length and defined manufacturer part number 315608-483 support repeatable use across multi-cabinet runs and follow-up projects. For cabinet and furniture work that relies on a matching edge profile and decor reference, this Rehau ABS edge banding provides the defined size, material, and roll length documented in its description.
Sold In: 1 Roll