Rehau ABS edgebanding described as 15/16 x 1.2mm gives you a defined width and thickness for covering exposed panel edges, so you get a consistent visual line along doors, drawer fronts, and casework. The ABS material identified in the description provides a plastic edge solution, allowing you to match modern panel constructions that also use engineered substrates. The 15/16 inch width covers common panel thicknesses with a bit of overhang for trimming, which supports clean routing or flush trimming after application. The 1.2mm thickness builds a noticeable edge profile, so the banding reads as a solid edge instead of a thin film in finished installations. This product is listed under the Edge Banding class, confirming its role specifically for edge treatment in woodworking and cabinet projects.
The stated 15/16 inch width on this Rehau ABS edgebanding gives you a band slightly wider than many common panel thicknesses, which supports trimming both faces after bonding for a flush, straight edge. The 1.2mm thickness noted in the description creates a sturdy edge profile, so routing and scraping operations can remove overhang while maintaining a solid-feeling edge. The 600ft length referenced in the SAP description provides an extended run of material, which suits shop setups that prefer to load a roll and run multiple cabinets, shelves, or partitions with fewer interruptions. The ABS material callout defines it as a plastic edgeband, so it aligns with tooling and adhesive choices typically used for ABS-based edge work.
The Rehau ABS edgebanding with dimensions 15/16 x 1.2mm is suited to applications where you are edging panels near three-quarter-inch class thickness, because the width lets you cover the core and still trim both faces cleanly. Being classified as Edge Banding positions it for cabinet boxes, shelves, and doors where an exposed substrate edge needs to be covered to complete the piece. The ABS LE CP41173 EMB LAC designation identifies a specific appearance family, which helps when you are matching edges to panels or components that reference the same code in a project schedule. The manufacturer part number 315608-485 gives you a precise identifier, so you can specify this exact edgeband on drawings, cut lists, or purchasing notes across multiple jobs. The listing under Miscellaneous|Edgebanding by Wurth Baer Supply ties it directly to general woodworking and cabinetmaking environments, aligning it with other shop materials used on similar equipment.
The 15/16 inch width stated in the SAP description provides intentional coverage beyond typical panel thickness, allowing trimming tools to remove slight panel variation and still leave a clean, centered edge line. The 1.2mm thickness influences how the edge feels and looks; this thickness gives the band enough body to hold its profile after trimming, supporting a defined edge rather than a minimal skin. The 600ft length listed on the product allows longer production runs before roll change, which helps maintain consistent setup conditions on edgebanders and reduces stops during cabinet or casework runs. Because the product is specifically identified as ABS edgebanding, you know it is intended for processes and edgebanding machines set up for ABS materials, supporting predictable behavior with established ABS-compatible adhesives and trimming tools. The precise manufacturer part number 315608-485 also aids in maintaining repeatability across projects, since calling out this code brings the same width, thickness, and appearance each time.
The Rehau 315608-485 ABS edgebanding is described as 15/16 x 1.2mm, which defines its width and thickness for planning panel coverage and trimming operations.
The 315608-485 product is identified as ABS edgebanding, meaning it uses an ABS plastic edge material suited to ABS-oriented edgebanding setups.
The SAP description specifies 600ft, providing a roll length suitable for extended cabinet and casework runs with fewer material changes.
The ABS LE CP41173 EMB LAC wording identifies a particular style and surface reference, supporting matching to panels or components that use the same code.
The 1.2mm thickness provides a substantial edge profile, helping the banding present as a solid edge after trimming rather than a very thin layer.
The 15/16 inch width gives slight overhang beyond many panel cores, allowing trimming tools to create a flush edge on both faces after bonding.
The Rehau ABS edgebanding 315608-485 combines a 15/16 inch width, 1.2mm thickness, and a 600ft length to support consistent edge coverage on production and custom work. The ABS LE CP41173 EMB LAC designation and clear part number give you a repeatable choice when you need this specific style and size across multiple cabinet or woodworking projects.
Sold In: 1 Roll