Rehau ABS edgebanding 315608-489 is ABS edge banding in a 15/16 inch width and 1.2mm thickness, so it covers common panel thicknesses while leaving enough material for a clean trim pass. The ABS material defines it as a thermoplastic edging suited to modern casework where ABS is specified. The 15/16 inch dimension gives coverage beyond a 3/4 inch panel face, which supports flush trimming without exposing the core. The 1.2mm thickness creates a substantial edge profile that resists visual telegraphing from the substrate. The product is identified as edge banding, so it is meant to finish raw panel edges for a uniform appearance around cabinets, fixtures, or furniture components. The manufacturer part number 315608-489 provides a precise reference when repeating a job or matching existing runs on follow-up projects.
The 15/16 inch width on this Rehau ABS edgebanding gives working room beyond a typical panel thickness, which supports consistent alignment during setup before trimming. The 1.2mm thickness establishes how the edge will present where doors, drawer fronts, or shelves meet, allowing planning of reveals and gaps around that known build-up. Identifying the product as edge banding signals that it is designed to be applied along exposed board edges, which fits directly into standard edgebanding workflows on casework, built-ins, and commercial fixtures. The ABS material designation means all edges finished with this product will share the same ABS character, so edges across a project remain visually consistent where this specification is used.
This Rehau ABS edgebanding, with its 15/16 inch by 1.2mm dimensions, fits work where panels need a finished edge that matches an ABS specification. The sizing lets it sit slightly proud of common sheet goods during application, so trimming operations can produce a flush, straight edge around cabinet sides, tops, and shelves. As edge banding, its role is to cover exposed substrate along doors, drawer fronts, and carcass parts, which brings raw composite or core material in line with the finished face. The specific manufacturer part number 315608-489 links this material to a defined appearance, supporting projects that run multiple components from the same reference. On repeat jobs, that same part number lets installers duplicate previous visual results by selecting exactly the same Rehau ABS edgebanding.
The defined 15/16 inch width gives a predictable amount of overhang to work with, which can streamline trimming passes and reduce rework from insufficient coverage at the edge. The 1.2mm thickness tells installers how much material stands at the edge, which helps set expectations for feel at hand-contact points like cabinet fronts and shelf edges. Being clearly labeled as ABS edge banding aligns it with jobs that call out ABS in their material schedule, which helps keep project documentation and on-site materials in sync. The manufacturer part number 315608-489 also allows straightforward communication between shop, office, and field teams when specifying or reordering this exact edgeband. Together, these defined details help maintain consistent edging results from part to part and job to job whenever this Rehau ABS edgebanding is used.
Rehau ABS edgebanding 315608-489 is specified as 15/16 inch wide and 1.2mm thick, which provides coverage for typical panel edges and enough material for accurate trimming.
Rehau 315608-489 edgeband is made from ABS, so it matches projects requiring ABS edge material rather than other edging types.
The 15/16 inch width gives slight overhang on standard panels, which supports trimming back to a flush, straight finished edge on cabinet and furniture parts.
The 1.2mm thickness creates a noticeable ABS edge profile, which influences the finished look and feel where hands regularly contact doors and shelves.
Manufacturer part number 315608-489 uniquely identifies this Rehau ABS edgebanding, which supports repeating the same edging selection across multiple jobs.
This ABS edgebanding suits applications where raw panel edges need finishing, such as cabinet parts, shelves, and casework using ABS-specified materials.
This Rehau ABS edgebanding, identified by part number 315608-489, combines a 15/16 inch width with a 1.2mm thickness to serve standard panel edging work. The ABS material and defined dimensions align with projects that call out ABS edge banding in this size range, helping keep design intent and site execution matched. For cabinet, furniture, or casework builds that repeat a known edging specification, selecting this exact Rehau ABS edgebanding maintains consistency from one run to the next.
Sold In: 1 Roll