Rehau ABS edgebanding 315608-490 is ABS edge banding from Rehau, Inc. that finishes exposed panel edges, giving casework and furniture a defined boundary instead of a raw substrate line. The edge banding belongs to the Edge Banding product class, so it is intended to cover and protect panel edges in woodworking projects. The ABS material described in the SAP description as ABS LE provides a plastic edge rather than a raw board edge, which supports a more uniform appearance across cabinets and fixtures. The 15/16 inch width noted as 15/16 in the SAP description covers standard 3/4 inch panel thickness with margin for trimming, which helps installers get full edge coverage without alignment gaps. The 1.2mm thickness stated in the SAP description establishes a solid edge profile, which supports a more substantial edge look compared with very thin tapes.
The 15/16 inch width shown in the SAP description gives installers extra coverage over the 3/4 inch panel thickness commonly used in casework, which allows trimming both faces for a centered edge line. The 1.2mm thickness from the SAP description defines how the edge sits relative to the panel face, which helps set trimming and flushing expectations for handheld or automated edgebanders. The 600FT length listed in the SAP description provides a long, uninterrupted supply, which supports continuous setup on an edgebanding station without frequent material changes. The identification as ABS in the SAP description indicates a thermoplastic edge, which fits common edge processing methods used with ABS materials in woodworking shops.
The Category entry listing Miscellaneous and Edgebanding, together with the Product Class of Edge Banding, shows that this Rehau ABS Edgebanding 315608-490 is intended for edge finishing on panels in woodworking applications. The 15/16 inch width and 1.2mm thickness from the SAP description match panel edge coverage needs on typical cabinet, casework, or furniture components, which makes the product suitable for edging shelves, cabinet sides, and similar parts. The ABS material identified in the SAP description provides a plastic edge, which aligns with shop processes that use ABS edge banding for laminate or board-based constructions. The 600FT length specified in the SAP description supports production runs where multiple components share the same edge material, which helps maintain consistent edge appearance across a full project set.
The manufacturer part number 315608-490 uniquely identifies this Rehau ABS edgebanding, which helps shops repeat the same edge selection on reorders so finished projects maintain color and profile continuity over time. The clear dimensional callout in the SAP description, 15/16 x 1.2MM, gives installers a defined width and thickness to plan trimming and profiling steps, which reduces guesswork when setting up edgebanding equipment. The classification as Edge Banding and the Brand listing as Rehau, Inc. indicate that this product sits within a known edgebanding family, which supports standardizing material choices across different jobs. The 600FT length noted in the SAP description gives one continuous reel for extended runs, which can reduce interruptions during edge operations and help maintain a steady workflow along longer cabinet or fixture lines.
Rehau ABS Edgebanding 315608-490 is described in the SAP description as ABS, so it supplies a thermoplastic edge surface that matches processes designed for ABS edge materials.
The SAP description lists the width as 15/16 inch, which provides coverage beyond 3/4 inch panels so both faces can be trimmed to a flush, centered edge line.
The SAP description notes a 1.2mm thickness, giving a substantial edge profile that defines the edge visually and supports trimming setups on edgebanding equipment.
Rehau ABS Edgebanding 315608-490 is listed in the SAP description with a 600FT length, supporting extended cabinet or furniture runs without frequent material changes.
The Category of Miscellaneous and Edgebanding and the Edge Banding product class show it is intended for panel edge finishing in woodworking, such as cabinets or furniture components.
The manufacturer part number 315608-490 uniquely identifies this specific ABS edge banding, helping shops reorder the same material to keep future work visually consistent.
Rehau ABS edgebanding 315608-490 combines ABS material, a 15/16 inch width, and a 1.2mm thickness, as detailed in the SAP description, to support clean, defined panel edges on cabinet or furniture projects. The 600FT length listed in the SAP description provides extended run capacity for shops working through multiple components or full room layouts. The identification as Edge Banding in the product class confirms its role in covering exposed panel edges, which helps align it with edge-focused operations in woodworking environments.
Sold In: 1 Roll