Rehau ABS edgebanding 315608-491 15/16 x 1.2mm

Rehau ABS Edgebanding 315608-491 For Clean Edges

Rehau ABS edgebanding 315608-491 is ABS edge banding designed to finish exposed panel edges with a consistent look. The 15/16 x 1.2mm ABS profile covers standard panel thicknesses with enough overhang for trimming, which supports clean, straight edge finishes on cabinets and casework. The LE CP41621 designation identifies the specific design reference, so it can be matched within projects using that same code. The embossed lacquered surface, noted as EMB LAC, provides a textured, coated finish that visually enhances edges while offering a uniform appearance across runs. A 600 ft length per roll allows extended production from a single part number, which reduces changeovers on repetitive jobs and helps keep edge appearance consistent from piece to piece.

Key ABS Edge Banding Details For Project Work

• The 15/16 inch width gives coverage across common panel thicknesses while leaving trim allowance, which supports tight, flush edges after trimming operations on cabinetry components.
• The 1.2mm ABS thickness adds a defined edge profile, which helps create a solid-feeling front edge that matches the panel face visually across doors, drawer fronts, and case parts.
• The LE CP41621 identifier ties this edgebanding to a specific design reference, which supports visual coordination wherever that design is used within a fabrication run or service replacement job.
• The embossed lacquered EMB LAC finish provides a textured, lacquered surface, which supports a finished appearance on visible cabinet edges without additional edge finishing steps in the shop.
• The 600 ft roll length supports longer runs from a single coil, which lets shops process multiple cabinets or components under one setup for consistent edges across the order.

Edgebanding Sizing That Supports Straightforward Application

This ABS edgebanding is specified at 15/16 inch wide, giving workable coverage when applying to standard panel thicknesses and leaving material for trimming to a flush edge. The 1.2mm thickness adds enough material at the edge to handle trimming operations while maintaining a defined profile line along the panel. As an ABS edge banding, it is suited to edgebanding application processes designed around ABS material, aligning with common shop workflows that use ABS tape on casework and cabinetry.

How This Rehau ABS Edgebanding Fits Shop Use

Where Rehau ABS Edgebanding 315608-491 Is Applied

This Rehau, Inc. ABS edgebanding in the 15/16 x 1.2mm size is used as edge banding on panels where the design matches the LE CP41621 reference. The width spans the panel edge with margin, so it can be applied to cabinet sides, shelves, doors, or drawer fronts and then trimmed back to a flush line, keeping the edge aligned to the face material. The 1.2mm thickness creates a visible, deliberate edge, which suits applications where the banded edge is regularly seen, such as exposed cabinet fronts. The embossed lacquered EMB LAC surface adds a textured, coated finish, which lets the edge present as a finished surface wherever the panel edge is part of the visible cabinetry layout.

Why These ABS Edgebanding Details Support Consistent Results

The 15/16 inch width and 1.2mm thickness of this ABS edge banding work together to handle trimming while maintaining a uniform edge profile, which helps keep lines straight across multiple panels within a job. Using the LE CP41621 design reference allows fabricators to repeat the same visual edge detail whenever that code is specified in plans or prior work, supporting consistent appearance on new builds and follow-up pieces. The embossed lacquered EMB LAC finish brings a textured, lacquered surface to the edge, which reduces the need for separate edge finishing steps once the tape is applied and trimmed. With 600 ft supplied under the 315608-491 part number, shops can run larger quantities of parts under the same edgebanding setup, which supports repeatable edge results from the first piece through the end of the coil.

Common Questions About Rehau ABS Edgebanding 315608-491

Select Rehau ABS Edgebanding 315608-491 For Matching Work

Rehau ABS edgebanding 315608-491 combines a 15/16 x 1.2mm profile, LE CP41621 design reference, embossed lacquered EMB LAC finish, and 600 ft length to support edge treatment across coordinated cabinetry projects. For jobs that specify this design and size, this ABS edge banding provides the defined edge profile and visual consistency needed to carry the same look across cabinet fronts, shelves, and case parts. Select this part number when that combination of dimensions, finish, and design reference aligns with the planned work.