Rehau ABS edgebanding 315609-018 is an ABS edge banding product designed to finish exposed edges on panels where a matching banded edge is required. The 15/16 inch width covers typical panel thickness with a slight overhang, giving room to trim flush for a clean line. The 1.2mm thickness provides a more substantial edge profile than thin tape, which supports a solid feel on cabinet and furniture edges. The ABS material means the banding is made from acrylonitrile butadiene styrene, which is commonly selected for edge banding in woodworking applications. The LE CP20234 LAC designation identifies a specific decor or color code within the Rehau system, which helps match this banding to the intended board or finish series. The 600 ft length in a single roll allows longer production runs before changing rolls, which suits shop workflows and repeat projects.
This Rehau ABS edgebanding has a stated width of 15/16 inch, giving coverage beyond standard panel thickness so the edges can be trimmed back for a tight, clean finish. The 1.2mm thickness defines the edge build, which affects how the profile feels to the touch and how it transitions to the face of the panel. Together, these dimensions support setup decisions on edgebanders and trimmers, from cutter projection to flush-trim and scraping operations. The ABS construction ties directly to tooling choices, as many shops run dedicated settings and knives for ABS edge banding thickness ranges such as 1.2mm.
This Rehau, Inc. ABS edgebanding in the 315609-018 designation is part of the Edge Banding product class, so it is intended for use on exposed edges of panels in woodworking projects. The 15/16 inch width supports use on panels where a slightly oversize band is preferred for trimming back, such as cabinet sides, doors, shelves, and similar casework components. The 1.2mm thickness suits applications where a more substantial edge than thin tape is desired, which can be important on frequently handled edges like cabinet doors and drawer fronts. The LE CP20234 LAC description identifies the specific look within Rehau offerings, which matters when aligning this banding with its matching board or surface in a coordinated project. The 600 ft length supports environments producing multiple parts to the same specification, such as cabinet shops or millwork runs needing consistent edge treatment.
The defined 15/16 inch width gives installers a predictable overhang to work with, which helps set up trimming and scraping equipment to leave a consistent reveal and reduce rework. The 1.2mm thickness gives edgebanding machines a clear thickness target, which supports stable feed pressure and cutter settings tailored to that profile. Because the material is ABS, shops can align this product with tooling, adhesives, and heat settings commonly used for ABS edge banding, which aids repeatable bonding and finishing from job to job. The specific manufacturer part number 315609-018 ties every roll to the same Rehau specification, which helps maintain uniform appearance and edge feel across large installations using this code. The LE CP20234 LAC designation further anchors the color or decor match, so multiple batches using this product tag align visually when installed across a project.
Rehau ABS edgebanding 315609-018 has a width of 15/16 inch and a thickness of 1.2mm, giving installers an oversize band to trim while creating a more substantial edge profile.
This product is ABS edge banding, meaning it is made from acrylonitrile butadiene styrene, which aligns with common edge banding practice and supports standard shop tooling setups for ABS material.
Rehau ABS edgebanding 315609-018 is specified at 600 ft, giving shops a long run length that supports repeated cabinet or furniture parts without frequent roll changes.
The LE CP20234 LAC description identifies a specific Rehau decor or finish code, which ties this ABS edgebanding to a particular visual match within the Rehau system.
This 15/16 x 1.2mm ABS edgebanding is used to cover exposed panel edges on cabinet and furniture components, providing a finished edge that can be trimmed flush to the panel face.
The manufacturer part number 315609-018 identifies this exact Rehau ABS edgebanding specification, helping shops reorder the same width, thickness, and decor for consistent results.
The Rehau ABS edgebanding, 315609-018, combines a 15/16 inch width, 1.2mm thickness, and ABS construction to support finished panel edges on cabinet and furniture projects. The defined LE CP20234 LAC description and manufacturer part number give a consistent reference for matching edges across repeated jobs. The 600 ft length suits production environments running the same specification on multiple components. For projects calling for this Rehau ABS edge banding code, this product provides the specified dimensions and identification needed to align edge treatment with the intended design.
Sold In: 1 Roll