Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding 315609-025 is an ABS edge banding that covers and finishes exposed panel edges using the LE CP40328 LAC finish, so cabinet and furniture edges present a consistent appearance with the laminated surface. The 15/16 inch width gives coverage for standard panel thicknesses with a small overhang, allowing trimming to a crisp, straight line along cabinet sides and shelves. The 1.2mm thickness provides a solid edge treatment, building a defined profile that stands up to normal shop handling and installation work. The ABS material creates a uniform, machinable edge that works well with common edgebanding equipment, so cuts and trims stay predictable from part to part. The 600ft length gives extended run capability from a single coil, supporting longer production runs or multiple projects without constant material changeover.
The 15/16 inch width of Rehau ABS edgebanding 315609-025 provides enough coverage to center on the panel and still leave a small overhang, which supports clean trimming on both sides during installation. The 1.2mm thickness works well with common trimmers and scrapers, so installers can cut flush and slightly radius the edge in one workflow without compromising coverage. The LE CP40328 LAC finish identification keeps the visual side of the band consistent from one length to the next, aiding alignment when joining multiple edged parts in a single assembly. The ABS construction presents a predictable surface for glue application by compatible equipment, helping the band seat evenly along cabinet and furniture components.
The 15/16x1.2mm size positions Rehau ABS edgebanding 315609-025 for use on panel-based cabinetry, shelving, and furniture components that need a dressed edge matching a LE CP40328 LAC surface. The width covers the full thickness of common sheet goods with some excess, which supports edging vertical panels, horizontal shelves, and door or drawer fronts that fall within typical casework dimensions. The continuous 600ft coil length suits repeat runs of panels using the same finish, so shops can edge multiple kitchen sections, office runs, or furniture pieces from a single lot of material. The ABS composition allows machining of the finished edge, so pieces can move from the edgebander to trimming and light profiling steps while maintaining the same finish designation across all parts.
The 1.2mm ABS thickness in Rehau ABS edgebanding 315609-025 gives enough material at the edge to handle trimming and scraping without exposing the core, which supports a uniform appearance when parts are aligned in an installation. The LE CP40328 LAC finish callout ties the band visually to its matching surface, reducing finish variation between panel face and edge in completed casework. The 600ft length reduces interruptions for coil changes, so machine settings for temperature, feed, and trimming can stay stable over long production runs using this edge banding. The 15/16 inch width aligns well with common panel buildups, which helps installers maintain a straight, centered band along the edge and avoid narrow coverage that would demand extra corrective passes. Together, these details support repeatable, predictable edging results in cabinet and furniture projects using this specific Rehau finish.
Rehau ABS edgebanding 315609-025 is 15/16 inch wide and 1.2mm thick, which supports edging standard panel thicknesses while providing enough material for trimming and light edge profiling.
Rehau ABS edgebanding 315609-025 uses the LE CP40328 LAC finish designation, which identifies the visual match so panel faces and edges can share the same appearance in an assembly.
Rehau ABS edgebanding 315609-025 is supplied in a 600ft length, allowing extended production runs or multiple projects to be completed from a single coil of material.
Rehau ABS edgebanding 315609-025 at 1.2mm thickness gives a solid edge presence, which supports trimming, scraping, and light profiling without risking exposure of the underlying panel core.
Rehau ABS edgebanding 315609-025 at 15/16 inch width covers the panel edge with extra material, allowing installers to trim both sides flush and leave a clean, straight edge line.
Rehau ABS edgebanding 315609-025 suits cabinet, shelving, and furniture projects that use a surface corresponding to the LE CP40328 LAC finish and need consistent, machinable panel edges.
Rehau ABS edgebanding 315609-025 combines a 15/16 inch width, 1.2mm thickness, and LE CP40328 LAC finish designation to align panel edges with the intended surface appearance. The 600ft length supports efficient runs using the same finish. For cabinet, shelving, or furniture jobs that call for this specific Rehau finish and an ABS edge profile ready for standard trimming workflows, this edgebanding offers a consistent way to bring exposed panel edges in line with surrounding surfaces.
Sold In: 1 Roll