Rehau ABS edgebanding 324635-037 15/16X1.2 328FT

Rehau ABS Edgebanding 324635-037 For Clean Panel Edges

Rehau ABS edgebanding 324635-037 is an ABS edge banding product from Rehau, Inc. that covers and finishes raw board edges so panels present a uniform appearance in cabinet, furniture, or fixture builds. The SAP description 15/16X1.2 ABSLE C100280 LAC MIRGLS 328FT identifies this edgebanding as approximately 15/16 inch wide with a 1.2 mm thickness, giving you substantial edge coverage for common panel thicknesses. The ABS material defines the banding as a thermoplastic edging, which allows consistent machining and trimming during your normal edgebanding workflow. The 328FT length in the SAP description indicates the roll length, supporting longer runs of casework or multiple smaller projects from a single product. As an edge banding product in the Edgebanding category, it is suited to finishing exposed edges so they align visually with laminated or coated panel faces in professional woodworking environments.

Key Rehau ABS Edgebanding Details Installers Use

• The manufacturer part number 324635-037 ties this ABS edge banding directly to Rehau documentation, which simplifies reordering the same look and specification for future jobs or service work.
• The 15/16X1.2 dimension in the SAP description defines a banding sized for typical board thicknesses, which helps achieve full edge coverage with enough material for flush trimming without exposing the core.
• The ABSLE designation establishes this as ABS edge banding, so it behaves like other ABS trims during gluing, trimming, and finishing steps in standard woodworking production lines.
• The reference to 328FT in the description signals an extended-length roll, which supports continuous edging on larger cabinet runs and reduces changeovers during repetitive processing.
• The product class Edge Banding confirms its intended role as an edging solution, so it fits directly into panel fabrication workflows wherever raw board edges need a finished transition.

Dimensions And Material For Practical Edgebanding Setup

The 15/16X1.2 detail in the SAP description gives you a clear size reference when setting up your edgebander, allowing you to align guides and trimmers for a band just under 1 inch wide and 1.2 mm thick. This size pairing supports edging on many common panel thicknesses while leaving enough material for clean trimming and scraping passes. The ABSLE portion of the description identifies the material as ABS, so it runs in line with other ABS edge banding stock during heating, pressing, and post-processing. Knowing it is an Edge Banding product from Rehau, Inc. helps you match it with existing ABS programs or tooling profiles that your shop already uses for ABS-based edges.

Using This Rehau Edge Banding In Woodworking Projects

Where This ABS Edge Banding Fits In Panel Work

This Rehau ABS edgebanding, identified by manufacturer part number 324635-037, fits into woodworking projects wherever raw panel edges need a finished treatment that aligns with the face surface. Being categorized as Edgebanding and Edge Banding defines its job in the build sequence as the transition between the exposed panel face and the core. The 15/16X1.2 sizing supports use on many standard-thickness casework panels, so you can apply it along cabinet sides, shelving edges, or similar board edges expecting full coverage. The ABSLE material indicator shows it is ABS, which allows it to integrate into production lines already set up for ABS edging on furniture or fixture projects.

Why The Rehau 15/16X1.2 Format Supports Consistent Results

The SAP description 15/16X1.2 ABSLE C100280 LAC MIRGLS 328FT defines critical size and material characteristics that contribute to consistent edging results. The 15/16X1.2 measurement provides a repeatable basis for edgebander settings, so feed position, trimming depth, and post-machining steps can be dialed in around a known width and thickness. The ABSLE callout identifies the edgebanding as ABS, aligning its behavior with other ABS stocks during heating and pressing operations. The 328FT length supports longer continuous runs, which reduces interruptions on production jobs where consistent edge appearance across multiple panels is important. Together, these defined characteristics let shops treat this Rehau ABS edge banding as a predictable, repeatable component within their panel fabrication process.

Common Questions About Rehau ABS Edgebanding 324635-037

Select Rehau ABS Edgebanding 324635-037 For Defined Edges

Rehau ABS edgebanding 324635-037 gives you a clearly defined 15/16X1.2 ABS edge banding format in a 328FT length, so panel edging work can be planned around known dimensions and material behavior. As an Edge Banding product from Rehau, Inc. in the Edgebanding category, it fits naturally into professional cabinet, furniture, or fixture production where consistent edge appearance matters. Use the manufacturer part number 324635-037 and the SAP description 15/16X1.2 ABSLE C100280 LAC MIRGLS 328FT to align your edgebanding setup and job planning with this specific ABS edging choice.