Rehau ABS edgebanding 324635-081 is ABS edge banding that finishes exposed panel edges on woodworking and laminate projects, so raw substrate is covered and the job presents a unified surface around doors, drawer fronts, and panels. The 15/16 inch width stated in the SAP description gives coverage for standard 3/4 inch panel thickness with margin for trimming, which helps installers achieve a flush edge without exposing the core. The 1.2mm thickness listed in 15/16X1.2 adds a solid edge profile, which supports a more substantial feel at cabinet and furniture fronts. The ABS material called out in ABSLE provides a consistent, machinable plastic edge, so it routes and trims predictably on standard edgebanding equipment. The C400812 reference in the SAP description identifies the specific color or decor family, which allows matching to the corresponding board or laminate in production runs. The designation LAC MIRGLS further narrows the finish specification, providing a consistent appearance from edge to face on coordinated components.
The 15/16 inch stated width gives installers edge material that overhangs typical 3/4 inch panels, so there is trimming allowance to cut back to a flush edge without risking core exposure along cabinet or furniture sides. The 1.2mm thickness specified in 15/16X1.2 establishes an edge profile that is thicker than a thin tape, which supports a more defined front-edge feel after trimming and finishing. Because the SAP description identifies ABSLE, the product uses ABS edgebanding construction, and that plastic edge composition works with common edgebanding equipment to deliver stable feeding and consistent trimming. The C400812 and LAC MIRGLS references define a specific finish combination, allowing shops to align edge fit and appearance to corresponding surfaces when setting up production or replacement runs.
The Category listing as Edgebanding and Product Class Edge Banding define this Rehau, Inc. 324635-081 item as edge material for covering exposed panel sides on woodworking assemblies. The SAP description 15/16X1.2 ABSLE C400812 LAC MIRGLS 600FT ties it to applications where a 15/16 inch wide, 1.2mm thick ABS band is suited to edging furniture parts, casework, and cabinet components. Because the description identifies ABSLE, the product supplies an ABS edging surface that is appropriate wherever an ABS-edged panel or board is being finished. The C400812 reference gives a decor match point that aligns to a specific surface design, so this edge band is applied in jobs where that decor is already specified. The LAC MIRGLS detail further defines the look of the banded edge, which matters on visible cabinet fronts and sides where uniform appearance around all edges is required.
The 15/16X1.2 sizing in the SAP description provides both width and thickness details that directly affect installation results on shop equipment. With 15/16 inch width, the band projects beyond a standard 3/4 inch panel, creating trim allowance that helps edgebanders and handheld trimmers cut back to an even, chip-free final line. The 1.2mm thickness gives an edge substantial enough for a defined profile at cabinet doors and panels, while still processing well on typical woodworking machines used for edging. The ABSLE designation confirms the material as ABS edgebanding, so its plastic composition supports consistent trimming, scraping, and finishing steps in a standard workflow. Together with the C400812 and LAC MIRGLS identifiers, these details keep both fit and finished appearance predictable from part to part, which reduces variation across larger production jobs.
Rehau ABS edgebanding 324635-081 uses a 15/16 inch width, giving coverage over standard 3/4 inch panel edges with trim allowance for creating a flush, finished edge after processing.
Rehau ABS edgebanding 324635-081 is identified as 1.2mm thick in the SAP description, providing a solid edge profile that supports a more defined front edge on cabinets and furniture components.
Rehau ABS edgebanding 324635-081 is described as ABSLE, indicating ABS edgebanding material that processes consistently on typical edgebanding machines and trimming tools in woodworking environments.
Rehau ABS edgebanding 324635-081 uses the C400812 code to define a specific decor reference, helping shops match edge appearance to corresponding board or laminate designs in a project.
Rehau ABS edgebanding 324635-081 carries the LAC MIRGLS designation, which identifies a particular surface appearance so edge sheen aligns with related materials in visible installations.
Rehau ABS edgebanding 324635-081 lists 600FT in the SAP description, giving a 600 foot length reference that supports estimating linear edge coverage for shop or site projects.
Use the Rehau, Inc. 324635-081 ABS edgebanding details - 15/16 inch width, 1.2mm thickness, ABSLE material, C400812 decor reference, and LAC MIRGLS surface description - to align edge size and appearance with your specified panels and planned linear footage.
Sold In: 1 Roll