Rehau ABS edgebanding 324635-085 15/16X1.2 600FT

Rehau ABS Edgebanding 324635-085 For Clean Edges

Rehau ABS edgebanding 324635-085 is an ABS-based edge banding from Rehau, Inc. that finishes exposed edges on panels so cut edges match the surface visually and functionally. The product is classified by Wurth Baer Supply under Edgebanding, which places it in a dedicated edge finishing role on cabinetry and furniture parts where raw board edges need a stable trim. The 15/16X1.2 ABSLE C600902 LAC MIRGLS 600FT description specifies an ABS material in a lacquered, mirror gloss style that visually matches high-gloss surfaces, helping installers carry a consistent look across doors, drawer fronts, and casework edges. The 15/16 inch width covers typical panel thicknesses in woodworking, giving a margin for trimming without exposing substrate. The 1.2 thickness provides a defined finished edge profile that stands up to everyday edge use on casework components.

Key Edge Banding Details That Support Work

• The 15/16 inch width stated in 15/16X1.2 covers common panel thicknesses so installers can align, bond, and flush-trim without leaving raw substrate exposed along cabinet and furniture edges.
• The 1.2 thickness in the 15/16X1.2 specification creates a substantial edging layer, so the finished edge maintains a clear profile after trimming and light machining during normal shop workflows.
• The ABS designation in 15/16X1.2 ABSLE identifies an ABS material, so the edging provides a stable plastic surface that integrates with modern panel construction in cabinet and furniture projects.
• The C600902 code in the SAP description ties this edging to a specific decor reference, helping shops repeat the same visual match on follow-up jobs that require identical edge appearance.
• The LAC MIRGLS notation in the SAP description signals a lacquered mirror gloss style, so installers can match high-gloss fronts and create a continuous reflective look across edges and faces.
• The 600FT length stated in the SAP description provides a continuous run for production work, which supports longer setups on edgebanders and reduces changeovers on multi-cabinet batches.

Edgebanding Size And Finish For Installation Results

The 15/16X1.2 size in the SAP description gives installers a clear fit reference, because 15/16 inch edging overhangs typical 3/4 inch panels enough for precise trimming while the 1.2 thickness leaves a defined edge once flush. The ABSLE designation links the strip to ABS material use, so it behaves consistently along straight cabinet sides, drawer fronts, and shelves through cutting and trimming operations. The LAC MIRGLS description points to a lacquered mirror gloss appearance, allowing the edge to sit visually level with matching high-gloss panels after bonding and trimming. The C600902 reference keeps the color and gloss specification consistent across orders so replacement panels or added cabinets can carry the same edge look as the original run.

Using This ABS Edgebanding In Cabinet Projects

Where This Rehau ABS Edgebanding Fits Best

The Category listing as Edgebanding and Product Class as Edge Banding define this Rehau, Inc. 324635-085 product for use on exposed panel edges in woodworking, especially cabinet and furniture assemblies that need a finished perimeter. The 15/16X1.2 ABSLE C600902 LAC MIRGLS 600FT description aligns with casework built from sheet goods, where installers apply edging to door, drawer, and carcass edges so the substrate is fully covered. ABS material called out by ABSLE suits modern shop environments using panel processing equipment, since the edging is intended to be applied along linear edges and then trimmed flush. The LAC MIRGLS reference to a lacquered mirror gloss style helps the product integrate with high-gloss cabinet and furniture components, so doors and drawer fronts present a continuous appearance from face to edge. The C600902 decor code keeps the visual specification stable across multiple projects that share the same surface design.

Details That Support Repeatable Edge Banding Results

The 15/16 inch width in the 15/16X1.2 designation gives a defined allowance beyond standard panel thicknesses, which lets installers run the edging slightly proud and then trim it back to a clean, uniform line. The 1.2 thickness contributes to an edge profile that remains visible and consistent after flushing and light sanding, which benefits production runs where each cabinet needs to present the same edge feel. The ABSLE reference identifies ABS as the working material, so cutting, trimming, and slight profiling operations react in a predictable way across different stations in the shop. The C600902 code and LAC MIRGLS lacquered mirror gloss information together support color and gloss matching from job to job, allowing shops to specify the same edging whenever they repeat that surface design. The 600FT length supports extended runs on edgebanding machines, helping maintain consistent feed conditions and visual results across many parts in the same batch.

Common Questions About Rehau ABS Edgebanding 324635-085

Choose This ABS Edgebanding For Matching Panel Edges

Rehau ABS edgebanding 324635-085 combines a 15/16X1.2 size, ABS material, C600902 decor reference, and LAC MIRGLS lacquered mirror gloss style to align with high-gloss panel work. The 600FT length supports shop or jobsite runs where many cabinet or furniture parts share the same edge look. For projects that use this specific decor and finish across doors, drawer fronts, and carcass edges, this edging lets you carry that appearance through every exposed panel edge using a consistent Rehau, Inc. product designation.