Rehau ABS edgebanding 324635-086 15/16 x 1.2

Rehau ABS Edgebanding 324635-086 For Clean Edges

Rehau ABS edgebanding 324635-086 is an ABS edge banding from Rehau, Inc. that finishes raw panel edges so cabinet and furniture projects present a uniform, professional edge instead of exposed core material. The SAP description "15/16X1.2 ABSLE C600926 LAC MIRGLS 600FT" identifies this as 15/16 inch wide ABS edgebanding with a 1.2 mm thickness, which gives a substantial edge profile that stands up well in everyday cabinet use. The ABSLE and C600926 designation mark it as a specific ABS formulation and color reference, helping match this banding to the intended decorative surface in a project run. The LAC MIRGLS notation indicates a lacquered, mirror gloss style finish that visually aligns with high-gloss laminate or board faces. The 600FT length notation signals a long-run format suited to production shops and larger jobs where consistent material across many parts reduces visual variation.

Key Rehau ABS Edge Banding Details That Matter

• The 15/16 inch width noted in "15/16X1.2" covers standard panel thicknesses with a small overhang, which supports trimming flush on both faces for a clean, straight finished edge on cabinets and casework.
• The 1.2 mm thickness in the SAP description provides a robust edge band cross-section, which helps resist edge damage in normal use and gives a more solid feel than ultra-thin edge materials during everyday handling.
• The ABSLE material designation identifies this as ABS edgebanding, which works well in typical woodworking environments where thermoplastic edges are bonded to panels for a consistent appearance along doors, drawers, and case edges.
• The C600926 reference ties this edgeband to a defined color tone, which supports visual coordination between the banded edge and the specified surface material across a project or replacement parts.
• The LAC MIRGLS detail marks this Rehau banding as lacquered mirror gloss, which aligns with high-gloss panel faces so edge reflection and sheen remain consistent on doors and visible cabinet components.
• The 600FT length noted in the SAP description suits longer production runs, which helps shops run multiple parts or full projects from a single reel for repeatable appearance from part to part.

Edgebanding Size And Finish For Practical Installation

The "15/16X1.2" sizing on this Rehau ABS edgebanding defines how it behaves during banding and trimming. The 15/16 inch width spans the thickness of common panel stock with a manageable margin, so edge-banding equipment can apply the strip and then trim both sides flush without leaving narrow unprotected areas. The 1.2 mm thickness gives the operator a stable edge during machining, which supports cleaner trimming passes and reduces the tendency for chatter along the edge. The LAC MIRGLS lacquered mirror gloss notation indicates a smooth, high-gloss surface that pairs well with fine trimming and scraping, allowing the final edge to visually connect to glossy fronts or panels once excess is trimmed and edges are dressed.

Using Rehau 324635-086 Edgebanding In Cabinet Work

Where This ABS Edge Banding Fits Best

This Rehau ABS edgebanding, identified by manufacturer part 324635-086 and SAP description "15/16X1.2 ABSLE C600926 LAC MIRGLS 600FT," is positioned for projects that use ABS edge banding in a defined C600926 color and mirror gloss finish. The 15/16 inch width is suited to edging panels where the finished thickness is near that dimension, such as cabinet sides, shelves, doors, and drawer fronts that rely on banded edges for a seamless look. Because the material is ABSLE, it integrates into woodworking workflows that bond ABS edgeband to substrate panels, so the same banding can run across multiple components for matching edges. The C600926 color reference lets shops tie this banding to a specific decorative surface selection, supporting visually unified runs of casework or furniture elements.

Why These Dimensions Support Consistent Results

The combination of 15/16 inch width and 1.2 mm thickness on this Rehau ABS edgebanding matters for repeatable machining results. The width covers the panel thickness while providing enough excess for standard trimming tools to cut back to a straight, crisp line along both faces, which helps avoid edge reveal or uneven coverage on finished pieces. The 1.2 mm thickness offers a solid edge profile that can be trimmed, profiled, or lightly sanded without feeling overly delicate, which is useful when doors and fronts are handled frequently during fitting. The LAC MIRGLS lacquered mirror gloss surface ties the trimmed edge visually to high-gloss boards, so when parts are aligned in a bank of cabinets, the edges and faces share similar sheen and reflection. The 600FT length allows the same batch of ABSLE C600926 material to be run across many parts, supporting consistent color and finish appearance throughout a project lineup.

Common Questions About Rehau ABS Edgebanding 324635-086

Select Rehau 324635-086 For Matching Gloss Edges

Rehau ABS edgebanding 324635-086 combines a 15/16 inch width, 1.2 mm thickness, ABSLE material, and C600926 lacquered mirror gloss specification, giving shops a defined edge banding for high-gloss projects. By using this 600FT ABS edge banding roll where the color and finish match the chosen board, runs of doors, drawer fronts, and case parts can share a unified appearance from face to edge. For cabinet and furniture work built around ABS edge banding in this color and gloss, selecting this specific Rehau part provides continuity from the first piece to the last.