Rehau ABS edgebanding 324635-095 provides an ABS-based edge banding solution under the Rehau, Inc. brand, so cabinet and furniture builders can match their edge treatment to a known manufacturer part number when planning production runs or repeat jobs. The product is defined as edge banding in the edgebanding category, which positions it for covering and protecting exposed panel edges on cabinetry, casework, and similar woodworking assemblies where a clean transition is required between the board face and the edge. The SAP description specifies 15/16X1.2 ABSLE C100354 LAC MIRGLS 600FT, indicating a 15/16 inch edge width and ABS material that support typical panel thicknesses while giving a consistent edge profile along long runs. The reference to LAC MIRGLS ties the banding to a lacquered, mirror-gloss style description, giving fabricators a clearly labeled option when selecting finishes across a project line.
The 15/16 inch width called out in the 15/16X1.2 ABSLE C100354 LAC MIRGLS 600FT description works with many cabinet-grade panel thicknesses, so installers can orient the Rehau ABS edgebanding, apply it, and trim back to a flush edge without excessive waste. The 1.2 notation supports an edge band thickness that responds well to standard edge-banding machinery, contributing to a defined corner profile when trimmed. The ABSLE reference confirms ABS edge banding type, aligning with equipment and cutting practices already set up for ABS materials in many woodworking shops. Because the SAP description ties width, material, finish style, and length together under a single identifier, production teams can schedule this banding into their workflow knowing those aspects remain consistent from job to job.
The product class as edge banding and the category listing under edgebanding position Rehau ABS edgebanding 324635-095 for use on exposed panel edges in cabinetry, furniture, and general woodworking where a finished edge is required. The 15/16X1.2 dimension in the SAP description supports use on panels sized for that edge width, such as many case sides, shelves, or door components that call for substantial edge coverage. The ABSLE designation shows that this is ABS edge banding, aligning the material with modern cabinet and fixture designs that rely on ABS-based surfacing systems. With the LAC MIRGLS notation describing a lacquered mirror-gloss style, this banding suits projects where edge sheen coordination with glossy surfaces matters for the overall presentation of the cabinet or furniture piece.
The defined 15/16X1.2 ABSLE C100354 LAC MIRGLS 600FT SAP description gives fabricators a single reference that ties together width, material, and finish style, which streamlines setup when programming edgebanders or organizing cut lists. The 600FT length reference supports longer production runs from one designation, reducing part changeovers when running multiple cabinet components that share this ABS edge banding. The manufacturer part number 324635-095 serves as a stable reference for matching previous work, so replacement panels or additional cabinets can be edged with the same banding specification. Because the banding is clearly categorized as edgebanding and edge banding, purchasing and shop teams can route this product directly into edge-processing workflows without reclassification, helping maintain consistency across different projects that rely on ABS edgebanding.
Rehau 324635-095 is ABS edge banding in the edgebanding category, so it serves as a finishing material for covering exposed panel edges on cabinetry, furniture, and related woodworking projects.
The 15/16X1.2 size in the SAP description indicates a 15/16 inch edge width with a 1.2 mm style thickness, which supports covering typical cabinet panel edges with material suitable for trimming.
This Rehau edge banding is identified as ABSLE, indicating ABS edge banding, which aligns with setups and tooling commonly used for ABS-based edging in woodworking shops.
The LAC MIRGLS notation associates this banding with a lacquered mirror-gloss style, helping match high-sheen panel faces and edges when planning visually coordinated cabinet or furniture projects.
The 600FT length in the SAP description defines a long run of ABS edge banding, allowing production teams to edge many components under one specification during extended cabinet or furniture runs.
The manufacturer part number 324635-095 provides a fixed reference, so future orders can match the same ABS edge banding specification when expanding installations or producing additional matching pieces.
Rehau ABS edgebanding 324635-095, identified by the 15/16X1.2 ABSLE C100354 LAC MIRGLS 600FT SAP description, gives shops a defined ABS edge banding choice for cabinetry and furniture edges. By using this clearly specified edge banding, fabricators can align width, material, finish style, and part number across current projects and repeat work, supporting consistent edge appearance and straightforward reordering through Wurth Baer Supply.
Sold In: 1 Roll