Rehau ABS edgebanding 324635-097 is an ABS edge banding strip that finishes exposed panel edges, helping create a consistent look along cabinet and furniture runs. The 15/16 inch width covers common panel thicknesses while giving some working margin along the edge. The 1.2 designation defines the edgebanding thickness, which supports a solid feel at the edge and allows for standard trimming and flushing operations. The ABS material forms a uniform surface along cut board edges, so finished parts present a continuous face from panel to edge. The C600904 reference in the description identifies the specific decor match, which lets shops pair this edgebanding with the intended surface material across a project. The LAC MIRGLS detail further defines the finish style, supporting visual alignment when this edgebanding is used across multiple doors, drawer fronts, and case parts.
The 15/16 inch width on this Rehau ABS edge banding gives coverage that exceeds common panel thicknesses, so installers can center the strip, bond it, and then trim both sides flush without exposing core material. The 1.2 thickness works with standard edge-trimming tools, allowing cutters to reference reliably against the panel face during flushing passes. The ABS construction produces a uniform edge profile that responds predictably to trimming blades, which supports straight, clean transitions where panels meet. The defined decor and finish codes in the description let fabricators match this edgebanding to the specified surface, so once bonded and trimmed, the edge reads as part of the same design rather than a separate element.
In cabinet and furniture shops, the Rehau ABS edgebanding 324635-097 part number links directly to a particular decor, so estimators and production staff can call out the same edge detail from quote through final assembly. The 15/16 inch width accommodates typical carcass and front component thicknesses, which simplifies planning when panels from a given program share similar dimensions. The 1.2 thickness specification gives enough material for trimming passes while still aligning with standard edgebanding equipment, helping crews maintain familiar machine settings across runs. The ABS material produces a finished edge that visually supports modern board constructions, so parts cut from matching panel stock and finished with this strip carry a coordinated appearance. The C600904 LAC MIRGLS detail in the description further narrows the finish choice, allowing designers to specify this exact look when defining visible edges.
The defined 15/16 inch by 1.2 dimension lets production teams set up edgebanders and trimmers for repeat runs, reducing adjustment between batches that use the same Rehau 324635-097 code. Because the part number is fixed, purchasing and inventory can track this specific ABS edgebanding against drawings, which keeps color and finish consistent when jobs repeat or expand. The ABS construction supports a uniform edge profile along the full 600FT reference length, so sequential parts cut from a single run share the same edge appearance. The C600904 LAC MIRGLS description ties surface look and edge detail together, which helps maintain design intent when doors, drawer fronts, and case parts all rely on this same edge treatment. By standardizing on this exact edgebanding reference where the decor is specified, shops strengthen alignment between design documents, material pulls, and finished components.
Rehau 324635-097 is an ABS edge banding strip, so it finishes exposed panel edges and brings cut board edges into the same visual family as the selected decor.
This ABS edgebanding is described as 15/16 by 1.2, giving a 15/16 inch width and a 1.2 thickness that support trimming to a flush, finished edge.
The 15/16 inch width spans common panel thicknesses with extra margin, so installers can apply the strip, then trim both sides to a clean, even edge.
The 1.2 thickness provides enough material for trimming tools to engage reliably, supporting a defined profile without leaving an overly thin, fragile edge.
The C600904 LAC MIRGLS description identifies a specific decor and finish style, so edges can visually match the chosen surface across doors and panels.
The 600FT reference points to a long run length, allowing shops to edge multiple components in the same session while keeping decor and finish consistent.
Rehau ABS edgebanding 324635-097 combines a 15/16 inch width, 1.2 thickness, and defined C600904 LAC MIRGLS decor to support consistent edge treatment on cabinets and furniture. The ABS construction and 600FT reference length align with production workflows where repeated, matching edges matter. When drawings or material schedules specify this exact Rehau 324635-097 code, choosing this ABS edge banding ties the finished edge directly to the intended design and panel program.
Sold In: 1 Roll