Rehau ABS edgebanding 324696-016 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so they visually match RH Crystal HG Fumo 1686L surfaces, giving cabinets, fixtures, or panels a consistent edge appearance. This product is identified as RH Crystal HG Fumo 1686L 15/16X1MMX328', which means the roll provides 15/16 inch wide material at 1mm thickness over 328 feet, allowing long, continuous runs on multiple panels from a single roll. As an ABS edgebanding within the Edge Banding product class, it is suited to edging work in woodworking shops that use ABS-based banders, supporting straightforward processing in that workflow. The Rehau, Inc. branding gives installers a defined reference when matching existing Rehau ABS edge banding jobs or coordinating with other Rehau surface materials specified on project documents.
The RH Crystal HG Fumo 1686L 15/16X1MMX328' description links size directly to workflow: the 15/16 inch width works well where panels are roughly 3/4 inch thick, so installers can apply the band, trim both edges, and achieve a flush, square result with minimal adjustment. The 1mm thickness fits applications where a visible, defined edge is preferred over extremely thin banding, which helps designers maintain a consistent visual line around doors, drawer fronts, and casework. With 328 feet per roll, shops can run many cabinet parts or long architectural panels before changing material, supporting more continuous edgebanding cycles and simplifying batch runs on production equipment.
This Rehau ABS edgebanding, identified as RH Crystal HG Fumo 1686L 15/16X1MMX328', fits woodworking environments where panels need ABS-based edge coverage that aligns with a corresponding RH Crystal HG Fumo 1686L surface. In cabinet and fixture production using typical 3/4 inch engineered panels, the 15/16 inch width supports full edge coverage plus trim allowance, so operators can rely on standard trimming passes instead of custom widths. Being in the Miscellaneous|Edgebanding category and the Edge Banding product class, it sits naturally in workflows built around edgebanders and edge-finishing steps on furniture, cabinetry, and interior fixtures. The Rehau, Inc. branding and specific part number 324696-016 give designers and project managers a clear way to specify this material when aligning edges with other Rehau system components in a project.
The defined size RH Crystal HG Fumo 1686L 15/16X1MMX328' directly supports repeatable setups, because operators can dial in banding and trimming equipment once around the 1mm thickness and 15/16 inch width, then run at that setting across a full 328 foot roll. The consistent ABS material within the Edge Banding class supports predictable behavior at the panel edge, which helps maintain uniform edges across a run of cabinet parts or architectural components. The manufacturer part number 324696-016 acts as a stable reference in job documents and inventory systems, so when a shop specifies this ABS edgebanding once, future orders match the same RH Crystal HG Fumo 1686L color and size, supporting visual continuity on repeat or expansion projects.
Rehau 324696-016 is an ABS edgebanding in the Edge Banding product class, so it is used to cover and finish exposed panel edges in woodworking and cabinet construction.
This ABS edge banding is identified as 15/16X1MMX328', meaning it is 15/16 inch wide, 1mm thick, and supplied in a 328 foot length for extended edging runs.
The 15/16 inch width provides coverage beyond typical 3/4 inch panels, allowing trimming on both sides so the finished edge is flush with the panel faces.
The 1mm thickness gives a more substantial edge profile than very thin tapes, creating a defined edge line that suits many cabinet, furniture, and fixture designs.
RH Crystal HG Fumo 1686L in the description identifies the specific Rehau ABS edgebanding design, supporting visual coordination with matching RH Crystal HG Fumo 1686L surfaces.
The 328 foot roll length supports long, uninterrupted edging runs, reducing material changeovers during cabinet or panel production and helping streamline shop workflows.
Choosing Rehau ABS edgebanding 324696-016 provides an ABS edge banding sized at 15/16X1MMX328' and identified as RH Crystal HG Fumo 1686L, so edges can visually coordinate with that specific Rehau design across cabinet, furniture, or fixture projects. The defined dimensions and manufacturer part number let shops tie this exact Edge Banding product into job specifications and inventory, helping maintain consistent edge finishes on both one-off builds and repeat runs. Add this Rehau, Inc. ABS edge banding to projects that call for an RH Crystal HG Fumo 1686L matched edge so panel borders align with the intended design.
Sold In: 1 Roll