Rehau ABS edgebanding gives cabinet and fixture builders a dedicated edge solution in ABS material, tying into Rehau, Inc. panel programs where color code C300322 is specified. The 15/16 inch width covers common panel thicknesses while allowing a small overhang for trimming, so you can flush the edge cleanly after bonding. The 1mm thickness provides a defined edge profile that works well on straight cabinet components and similar casework parts. The lacquered mirror gloss surface supplies a high-sheen finish that visually matches mirror-gloss panel faces identified with the same C300322 reference. This lets shops carry the edge detail through doors, drawer fronts, and exposed carcass edges using the same visual standard. The 600 foot length in a single run supports larger jobs and repeat parts, helping maintain color consistency from piece to piece across a project.
The 15/16 inch by 1mm profile defines how this edgebanding behaves at the machine and on the finished edge. With 15/16 inch of coverage, there is enough material over the panel faces to trim both sides cleanly after the bonding step, which helps produce straight, chip-free reveals. At 1mm thick, the edge has enough body to register properly on trimmers and routers while still working well on typical cabinet and fixture components. The ABS construction aligns with ABS-based finishing systems, while the lacquered mirror gloss surface aligns visually with mirror-gloss panel designs identified by the same C300322 notation in a project specification.
Rehau ABS edgebanding under part number 324696-072 sits in the edgebanding category for finishing exposed panel edges on cabinets and related woodworking projects. The 15/16 inch width works along edges of panels that are near nominal 3/4 inch thickness, so the material can overhang slightly for trimming after bonding. The 1mm thickness is suited to vertical and horizontal edges on doors, drawer fronts, and carcass parts, where a defined edge is preferred over a paper-thin layer. The C300322 color and lacquered mirror gloss surface serve projects that specify a mirror-gloss appearance at both the face and edge, helping keep the visual line continuous from panel surface through to the edge treatment.
The combination of ABS material, 1mm thickness, and lacquered mirror gloss finish influences how this edgebanding performs during fabrication and in finished installations. ABS supports a stable edge strip that cooperates with common edgebanding machinery, while the 1mm thickness provides enough material for trimmers and routers to track accurately along the edge. The lacquered mirror gloss finish tied to the C300322 reference helps maintain appearance standards when matching to mirror-gloss components using that same code, which is valuable when projects are documented by manufacturer part and color numbers. The 600 foot length allows shops to run multiple cabinets or repeated parts from one coil, which supports visual consistency as the same color and gloss carry across many finished pieces on a job.
Rehau ABS edgebanding in part 324696-072 has a width of 15/16 inch, giving coverage across typical panel thicknesses with extra material to trim back for a clean, flush finished edge.
Rehau ABS edgebanding 324696-072 is 1mm thick, providing a solid edge layer that works well with edgebanders and trimmers while giving a defined profile on cabinet components.
This ABS edge banding uses a lacquered mirror gloss finish tied to the C300322 reference, supporting projects that call for a reflective, high-gloss edge aligned with mirror-gloss panels.
Rehau ABS edgebanding with part number 324696-072 is provided in a 600 foot length, which supports longer production runs and consistent appearance across multiple pieces.
The 15/16 inch width offers slight overhang on typical panel thicknesses, allowing trimming back on both faces to produce straight, clean edges after bonding.
The C300322 color code identifies the lacquered mirror gloss appearance, helping match this ABS edgebanding to panels or specifications using the same code for visual continuity.
Rehau ABS edgebanding 324696-072 combines 15/16 inch width, 1mm thickness, and a lacquered mirror gloss C300322 finish for projects that call out ABS edge treatment by part and color reference. For cabinets and casework using mirror-gloss designs, this 600 foot coil supports consistent, high-sheen edges that align with the specified Rehau, Inc. program across repeated components.
Sold In: 1 Roll