Rehau ABS edgebanding 324696-074 is an ABS edge banding in a 15/16 inch by 1mm size, so it covers standard panel thicknesses while keeping a slim, workable profile for routing and trimming. The ABS construction provides a consistent thermoplastic edge that machines cleanly in common shop setups. The C600901 lacquered mirror gloss finish creates a high-gloss surface along the panel edge, helping the edge visually align with matching high-gloss surfaces where a continuous look is needed. The 15/16 inch width gives a small margin past typical 3/4 inch substrates, supporting an even overhang for flush trimming on straight runs. The 1mm thickness offers a balance between a solid-feeling edge and efficient bending around standard cabinet components, which supports repeatable application on production or small-batch jobs.
The 15/16 inch width on Rehau ABS edgebanding 324696-074 gives a manageable overhang on standard sheet goods, which supports smooth tracking through edgebanders and controlled trimming at corners. Its 1mm thickness provides enough material for a firm edge without adding bulk, so post-trimming transitions from face to edge stay tight and unobtrusive. The ABS construction offers a consistent thermoplastic body that works with typical adhesion methods for edge banding, which supports straightforward integration into existing shop processes. The C600901 lacquered mirror gloss surface gives a high-gloss edge that aligns with similar gloss levels on finished faces, which is useful when creating contemporary cabinet, casework, or fixture components where the edge is fully exposed.
Rehau ABS edgebanding 324696-074, at 15/16 inch by 1mm, suits applications where panel edges on cabinets, furniture, or casework need full coverage with a slight overhang for trimming. The width supports use on typical 3/4 inch substrates with enough extra to handle slight panel variation while still trimming back to a crisp line. Its 1mm thickness creates an edge that feels substantial compared to ultra-thin films, which can help maintain a defined profile along doors, drawer fronts, and shelving. The ABS material provides a uniform edge strip suitable for machining and finishing steps common in woodworking shops, so it aligns with established tooling and processes. In projects where edge visibility is high, this combination of size and material helps keep the edge consistent from part to part.
The C600901 lacquered mirror gloss finish on Rehau ABS edgebanding 324696-074 delivers a mirror-gloss surface along the band, which lets the edge visually tie into matching high-gloss panels or fronts. That high-gloss level helps reduce the contrast between face and edge on modern designs where reflective surfaces define the look. Because the mirror gloss is part of the specified finish, shops can repeat the same appearance across reorders under the same 324696-074 part number, which supports consistent outcomes across phased projects or later additions. The combination of mirror gloss and 1mm thickness also supports a clean, defined edge line after trimming, reinforcing the sharp, reflective appearance that many contemporary installations require.
Rehau ABS edgebanding 324696-074 is specified at 15/16 inch wide by 1mm thick, giving coverage beyond typical 3/4 inch panels while keeping a trim-friendly thickness for cabinet and furniture work.
The C600901 designation on Rehau ABS edgebanding 324696-074 identifies a lacquered mirror gloss finish, supplying a high-gloss edge appearance that aligns with mirror-gloss surfaces in modern projects.
Rehau 324696-074 is ABS edge banding, so the strip uses an ABS thermoplastic construction that responds well to common edge-banding machining and trimming operations in woodworking shops.
The 1mm thickness on Rehau ABS edgebanding 324696-074 offers enough material for a solid-feeling edge while staying thin enough for controlled trimming and profiling on standard edging tools.
The 15/16 inch width on Rehau ABS edgebanding 324696-074 extends slightly past 3/4 inch panels, providing a small overhang that supports clean flush trimming on cabinet doors and case parts.
The Rehau part number 324696-074 ties together the ABS material, 15/16 inch by 1mm size, and C600901 lacquered mirror gloss finish, simplifying reorders when a specific edging standard is established.
Rehau ABS edgebanding 324696-074 combines 15/16 inch by 1mm sizing with a C600901 lacquered mirror gloss finish, aligning edge dimensions and appearance for high-gloss cabinet and furniture work. The ABS construction supports dependable machining in production or custom-shop environments. When a job calls for edges that visually track with mirror-gloss faces, this defined part number links material, size, and finish so you can match prior work or standardize new projects around one consistent edging choice.
Sold In: 1 Roll