Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding 324696-076 is Rehau ABS Edgebanding from Wurth Baer Supply designed as edge banding for finishing raw panel edges in woodworking projects. The ABS construction provides a non-metallic edging material that bonds to compatible substrates and creates a defined transition between the panel face and edge. The 15/16 inch width from the 15/16X1MM ABS C600926 LAC MIRRGLS 600FT description covers standard panel thicknesses while leaving trim allowance for flush routing. The 1mm thickness provides a solid edge profile that can be machined after bonding for clean lines. The C600926 LAC MIRRGLS designation identifies a lacquer mirror gloss surface that visually matches high-gloss panel faces when properly aligned. The 600FT length stated in the description supplies a continuous run that supports production runs and reduces changeovers during edge processing.
The 15/16 inch width noted in the SAP description gives fabricators extra coverage beyond nominal panel thickness, so the band can be centered, bonded, and then trimmed back to a flush edge without exposing the substrate. The 1mm thickness identified in 15/16X1MM ABS creates an edge that can be routed and lightly profiled while still presenting a solid-looking edge, which matters on cabinet doors and panels that will be handled frequently. Because the material is specified as ABS, it works as a thermoplastic edge in edgebanding workflows that apply heat and pressure, supporting stable operation in edge-banding machines set up for this material type.
This Rehau ABS Edgebanding, identified by manufacturer part 324696-076 and category Edge Banding, is suited to woodworking projects that require edging of exposed panel sides. The 15/16 inch width from the SAP description gives coverage for many cabinet-grade panel sizes, so it can be applied to case sides, shelves, and door edges while leaving sufficient material for trimming. The 1mm ABS thickness provides a moderate edge build that looks substantial on cabinet and furniture components without appearing bulky on standard carcass work. The lacquer mirror gloss surface referenced by C600926 LAC MIRRGLS pairs with high-gloss surfacing materials, which is useful where doors, drawer fronts, or panels carry a reflective finish and the edge needs a similar appearance. As a product classified under Edgebanding at Wurth Baer Supply, it fits into panel-processing workflows in cabinet shops and woodworking operations.
The combination of 15/16 inch width and 1mm thickness, stated in the 15/16X1MM ABS description, helps installers and fabricators achieve a controllable trimming window, reducing the risk of cutting past the face material when flush-routing the edge. The ABS material type noted in the SAP description offers a consistent thermoplastic that responds evenly to heat and pressure, aiding in repeatable bond lines across multiple parts in a run. The C600926 LAC MIRRGLS lacquer mirror gloss finish gives the edge a defined, reflective surface that can visually align with high-gloss faces, which matters on doors and drawer fronts where transitions between face and edge are directly in view. The 600FT length referenced in the description supports longer production runs from a single coil, helping maintain color and finish continuity along banks of cabinets or tall wardrobe components.
Rehau ABS Edgebanding 324696-076 is described as 15/16X1MM ABS, giving a 15/16 inch wide, 1mm thick strip that supports trimming to a flush, solid-looking edge on panel work.
The ABS material identified in the description provides a uniform thermoplastic edge that reacts predictably to heat and pressure, supporting steady feed and consistent bonding on edge-banding equipment.
C600926 LAC MIRRGLS specifies a lacquer mirror gloss finish, giving the edgebanding a reflective surface that visually matches high-gloss panel faces in visible cabinet and furniture applications.
The 600FT length stated in the SAP description offers a long continuous run, helping shops process multiple cabinets or panels with consistent color and gloss without frequent coil changes.
This Rehau ABS Edgebanding, classified as Edge Banding, is used to finish exposed edges of cabinet parts, shelves, and furniture panels where a defined transition from face to edge is needed.
The 1mm thickness specified in 15/16X1MM ABS creates an edge that machines cleanly and looks substantial, supporting durable-feeling edges on cabinet doors and panels after trimming.
Rehau ABS Edgebanding 324696-076 from Wurth Baer Supply combines a 15/16 inch width, 1mm thickness, and ABS material to support controlled trimming and consistent processing in edge-banding workflows. The C600926 LAC MIRRGLS lacquer mirror gloss finish aligns the edge appearance with high-gloss panels, helping maintain a unified look across cabinet doors, drawer fronts, and casework. The 600FT length described in the SAP record supports longer production runs where color and finish continuity across multiple parts are important. Use these verified dimensions, material, and finish details to match this edge banding to your panel work and shop processes.
Sold In: 1 Roll