Rehau ABS edgebanding 324696-078 is ABS edge banding designed to finish exposed edges on woodworking and laminate projects, so cabinet and furniture components present a uniform, professional edge instead of raw substrate.
The ABS material identified in the SAP description as "ABS" provides a stable, machinable edge, so installers can process it with common edgebanding equipment to achieve consistent results along straight or contoured runs.
The 15/16 inch width noted as "15/16" covers standard panel thicknesses with a slight overhang, giving room for trimming flush without exposing the core, which helps maintain a clean transition between face and edge.
The 1mm thickness stated as "1MM" offers a solid edge profile that resists everyday knocks better than thinner tapes, so finished parts hold their edge line through repeated handling in shop and field environments.
The reference to "C100365" and "LAC MIRRGLS" identifies a specific lacquered mirror gloss design, so this edgebanding visually matches its coordinated surface, helping casework, doors, and fronts read as a single, continuous finish.
The 15/16 inch sizing described in the product data gives adequate coverage on common panel thicknesses, so the banding can be applied slightly proud and trimmed back, reducing the risk of exposing core material at the edge.
The 1mm thickness noted in the SAP description provides enough material for precise trimming and light profiling, so installers can run standard trimmers and scrapers without cutting through the edge layer during final adjustment.
The ABS substrate called out as "ABS" works with typical edgebanding adhesives used in woodworking shops, so application on automated banders or manual equipment aligns with established gluing and feed practices.
The lacquered mirror gloss finish identified by "LAC MIRRGLS" is designed as a high-gloss visual, so handling and trimming can be set up to protect the sheen while still producing a tight, clean glue line along the edge.
The category listing as Edgebanding and the product class Edge Banding define this Rehau ABS edgebanding as a finishing component for panel edges, so it fits naturally into cabinet, closet, and furniture builds that use sheet materials.
The SAP description "15/16X1MM ABS C100365 LAC MIRRGLS 600FT" specifies width, thickness, material, design code, finish type, and run length, so planners can match this banding to panel programs that call for a corresponding mirror gloss face.
The design reference "C100365" provides a precise décor identifier, so production teams can group boards and edging by the same code, maintaining color and pattern alignment across doors, drawer fronts, and exposed ends.
The lacquered mirror gloss finish noted as "LAC MIRRGLS" supports use on high-visibility fronts, so vertical surfaces like tall pantry doors and wardrobe fronts maintain a continuous glossy appearance from face to edge.
The 600 foot length in the SAP description offers extended footage for runs, so shops can edge multiple components for a project with fewer coil changes, which supports consistent feed settings and glue performance across the job.
The manufacturer part number 324696-078 and Web Description "WBSC - 1432 - RU324696-078" tie this item to a specific Rehau program in Wurth Baer Supply systems, so repeat projects can reference the same identifier for matching results.
The combination of 15/16 inch width and 1mm thickness noted in the SAP description creates a predictable trimming envelope, so operators can dial in cutter settings once and run repeat batches without chasing dimension changes between coils.
The ABS material described as "ABS" machines cleanly under typical shop conditions, so edge-banders, trimmers, and scrapers can produce a smooth, uniform edge that aligns with laminate or other surfacing materials specified for the job.
The mirror gloss designation "LAC MIRRGLS" signals a reflective finish, so production teams can orient lighting and handling steps to protect the surface while keeping edge joints tight, which matters on long doors and continuous runs.
The Rehau brand identification in the product data indicates a defined manufacturing standard behind part 324696-078, so fabricators can expect consistent width, thickness, and finish characteristics from coil to coil within this program.
The Edgebanding category and Edge Banding product class confirm this item is intended as an edge solution rather than a sheet product, so it fills the specific role of covering raw panel edges within a coordinated surface system.
The detailed SAP description "15/16X1MM ABS C100365 LAC MIRRGLS 600FT" groups all key attributes in one reference, so estimators and production leads can specify the exact coil needed for a run, supporting predictable material usage and layout.
Rehau ABS edgebanding 324696-078 is edge banding for finishing exposed panel edges, so cabinets, furniture, and other casework present a coordinated surface instead of visible core material.
The 324696-078 ABS edge banding is 15/16 inch wide, so it covers standard panel thicknesses with a slight overhang for trimming back to a clean, flush edge.
This Rehau edge banding is 1mm thick, so it creates a solid edge profile that accepts trimming and light profiling while maintaining a defined, durable edge line.
The 324696-078 edgebanding is made from ABS, so it runs on standard edgebanding equipment and bonds with typical shop adhesives used for ABS edge applications.
The LAC MIRRGLS finish indicates a lacquered mirror gloss appearance, so the edge banding visually coordinates with high-gloss surfaces in the matching design program.
The 324696-078 coil is specified as 600 feet, so larger cabinet or furniture runs can be processed with extended edging length before changing to a new coil.
The defined combination of 15/16 inch width, 1mm thickness, ABS material, and LAC MIRRGLS lacquered mirror gloss finish in part 324696-078 gives installers a matched edging solution for high-gloss panel projects.
The 600 foot length supports continuous production runs, while the precise Rehau design code C100365 and manufacturer reference 324696-078 align edging to its intended surface program.
For projects calling for this specific mirror gloss décor, selecting this Rehau ABS edgebanding helps deliver a consistent, professional edge finish across cabinets, fronts, and exposed panels.
Sold In: 1 Roll