Rehau ABS edgebanding is an ABS edge banding solution identified as 324696-079 that finishes exposed panel edges so cut sheet goods present as complete, uniform components on the job. The 15/16 inch width covers typical 3/4 inch substrate plus overhang, giving room to trim flush for a tight finished edge. The 1mm thickness provides a defined, solid edge that holds its line well on cabinets, fixtures, and other casework. The C600924 lacquered mirror gloss surface delivers a high-gloss face that matches corresponding mirror gloss board programs, helping projects maintain consistent appearance across doors, drawer fronts, and carcass parts. ABS material supports standard edgebanding workflows using common shop equipment. The 600 ft length supports production runs where continuous footage improves throughput and reduces changeovers between lengths during banding operations.
The 15/16 inch sizing on this Rehau ABS edgebanding gives fabricators extra overhang beyond a standard panel thickness, so edgebanders and hand trimmers can cut back to an exact line without exposing the core. The 1mm thickness works well with typical machine settings for ABS, helping maintain predictable trimming and scraping across batches. The C600924 lacquered mirror gloss surface arrives ready for bonding, so shops can run parts directly through their edgebanding equipment and achieve a high-gloss look that blends into mirror gloss casework systems. The 600 ft length helps maintain consistent setup across many parts, which supports repeatable fit where panels meet doors, fillers, or adjacent cabinetry.
This Rehau ABS edgebanding, with its 15/16 inch width and 1mm thickness, suits cabinet and furniture edges where a defined, solid edge is important, such as doors, drawer fronts, and shelving in built-ins or commercial fixtures. The C600924 lacquered mirror gloss finish makes it especially relevant wherever corresponding mirror gloss board or laminate is used, so the edges carry the same high-gloss visual as the panel faces. Because it is ABS edge banding in a 600 ft length, it fits into production shops that run edgebanders on repeated cabinet or fixture components, supporting consistent color and gloss across a full job. The 324696-079 identifier ties this specific color and finish into Rehau programs, helping shops align edge material to chosen decorative surfaces in a repeatable way.
The 15/16 inch width on this ABS edgebanding gives extra material past the panel on both faces, which supports accurate trimming and scraping without risking reveal of the substrate at the edge. The 1mm thickness provides enough material for clean machining of corners and end grain transitions while still processing like standard ABS on edgebanders, so operators can hold settings across similar jobs. The C600924 lacquered mirror gloss surface lets installers carry a continuous gloss from panel face to edge, reducing visual breaks along cabinet fronts and sides. With 600 ft available in one run, shops can edge many components from the same roll, reinforcing uniform appearance and helping multi-piece assemblies look visually cohesive once installed.
This Rehau ABS edgebanding is 15/16 inch wide and 1mm thick, which suits edging for typical 3/4 inch panels while leaving trim allowance for a clean finished edge.
The C600924 lacquered mirror gloss finish provides a high-gloss, reflective surface that visually aligns with mirror gloss panel programs on cabinet and furniture projects.
The 600 ft length allows many parts to be edged from one roll, supporting uninterrupted edgebander runs and consistent appearance across large cabinet or fixture jobs.
The 324696-079 edge banding is made from ABS, which fits common edgebanding equipment and typical woodworking shop processing methods.
This mirror gloss ABS edging is typically used on cabinet doors, drawer fronts, and panels that pair with mirror gloss decorative surfaces in coordinated installations.
The Rehau part number 324696-079 identifies this specific ABS edgebanding with 15/16 inch width, 1mm thickness, and C600924 lacquered mirror gloss finish for ordering and repeat jobs.
Rehau ABS edgebanding in part 324696-079 combines 15/16 inch width, 1mm thickness, and C600924 lacquered mirror gloss to support clean, consistent edges on mirror gloss cabinet and furniture projects. For shops running repeated casework or fixture components, the 600 ft length aligns with production needs and helps keep edge appearance uniform from part to part.
Sold In: 1 Roll