Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding 324696-081 is a 15/16 inch wide, 1mm thick ABS edge banding designed to finish exposed panel edges with a consistent profile. The 15/16 inch width covers typical panel thickness with a small overhang, supporting clean trimming and a full edge reveal. The 1mm thickness provides a defined edge radius and solid feel that holds up well during normal handling in shop workflows. The ABS material gives a uniform surface that stays consistent across long runs, which matters when matching doors, drawer fronts, and casework. The C600933 lacquered mirror gloss finish creates a high-sheen face that visually aligns with high-gloss panel surfaces where a reflective edge is required. Supplied as a 600 foot length, this format supports longer production runs and repeat jobs while keeping the finish and dimensions constant from piece to piece.
This 15/16 inch by 1mm ABS edge banding is sized to sit slightly proud on standard panel thicknesses, giving trim room for edge banding machines and hand tools. The 1mm thickness responds well to typical edgebander trimming stations, allowing both flush trimming and light radius profiling in one setup. The lacquered mirror gloss finish rewards careful trimming and scraping, as a precise cut line keeps the high-sheen surface continuous from face to edge. The homogeneous ABS structure supports clean cuts at entry and exit points, which helps maintain a straight glue line and reduces visible transitions at corners. With 600 feet available on a single coil, setup time per job stays productive because the same material can run across multiple cabinet parts without changeover.
The Rehau, Inc. 324696-081 ABS edgebanding belongs to the edgebanding and edge banding product class, aligning it with typical cabinet, furniture, and casework edge finishing tasks. The 15/16 inch width lets you cover common panel edges used in carcasses, shelves, and fronts while leaving enough margin for trimming tools to establish a clean, straight edge. Because the banding is 1mm thick, it works well where a more pronounced edge is desired than ultra-thin tape, such as vertical cabinet ends or exposed shelf fronts. The C600933 lacquered mirror gloss finish supports installations that use high-gloss faces, so doors, drawer fronts, and side panels can carry the sheen consistently around the perimeter. As a 600 foot coil, this product supports runs where many parts share the same finish, such as multi-unit kitchens or repeated commercial casework layouts.
The defined 15/16 inch width and 1mm thickness give you stable reference dimensions for edgebander setup, helping dial in trimming stations and scraper positions once and then repeat that setting across jobs. The ABS material, specified in the description, behaves predictably under cutting pressure, which helps maintain uniform edge appearance and reduces adjustment time as you move from straight edges to shorter parts. The lacquered mirror gloss surface is engineered as a continuous finish layer, so maintaining sharp tooling and controlled feed rates preserves the gloss and keeps burnishing lines to a minimum during production. By working with a single C600933 color and sheen across a 600 foot length, you maintain the same edge look from the first cabinet component to the last, which is important when panels align across long runs or banks of doors. The clear identification through manufacturer part number 324696-081 also supports reordering the same specification when projects repeat.
Rehau ABS edgebanding 324696-081 is specified at 15/16 inch width and 1mm thickness, giving coverage with trim allowance and a solid edge profile for cabinet and panel edges.
The C600933 ABS edgebanding carries a lacquered mirror gloss finish, providing a reflective, high-sheen surface that visually aligns with high-gloss cabinet or panel faces.
The 1mm ABS thickness offers a substantial yet manageable edge that trims and scrapes predictably, supporting clean radius profiling and consistent results on cabinet parts.
The 15/16 inch width spans standard panel thickness with a slight overhang, allowing trimming to a flush, full-coverage edge without exposing the panel core in normal processing.
The 600 foot length supports extended runs of doors, fronts, and case parts using one coil, helping keep color and sheen consistent across large or repeat cabinet projects.
The 324696-081 ABS edgebanding is manufactured by Rehau, Inc., placing it within a recognized edgebanding line used for cabinet and casework edge finishing.
The Rehau ABS edgebanding, 324696-081, combines 15/16 inch width, 1mm thickness, and a C600933 lacquered mirror gloss finish to support high-gloss cabinet and casework edges. With 600 feet per coil, it suits production runs where consistent edge appearance and repeatable trimming performance are important across many matching parts.
Sold In: 1 Roll