Rehau ABS edgebanding is an ABS edge banding identified as Rehau, Inc. part 324696-085, so it gives you a clearly defined match when you need to repeat a job or align with a spec. The SAP description 15/16X1MM ABS C100286 LAC MIRRGLS 600FT shows that this is an ABS strip with a nominal width of 15/16 inch and a thickness of 1mm, which suits common panel builds where you want a slim, precise edge. The C100286 LAC MIRRGLS detail identifies a specific lacquered mirror gloss finish code, which helps you pair the edge visually with high-gloss surfaces on doors, drawer fronts, or casework. The 600FT notation indicates this is supplied in a 600-foot length, giving you enough material for larger runs or multiple cabinets without frequent reordering.
The SAP description 15/16X1MM ABS C100286 LAC MIRRGLS 600FT confirms a width of 15/16 inch, so you have enough coverage to work on standard panel thicknesses and still trim to a crisp line. The 1mm thickness combines a modest build with a defined ABS profile, which works well with common edgebander settings and manual trimmers designed for thin to medium ABS. Because this is an ABS edge banding you can align your machining parameters with other ABS materials in the shop, helping keep feed rates and cutter setups consistent. The 600-foot coil length supports continuous runs on multiple cabinet boxes or components, which is useful when you want uninterrupted color and finish along a whole project.
The product name Rehau ABS Edgebanding, 324696-085 and the SAP description 15/16X1MM ABS C100286 LAC MIRRGLS 600FT identify this as ABS edge banding suited to covering exposed panel edges. The 15/16 inch width works along typical cabinet and casework edges, giving a slight overhang on many panels so you can trim back to the surface plane. The 1mm thickness is commonly used on cabinet doors, shelves, and carcass parts where you want an edge that feels solid yet stays in proportion to modern, flat-front styles. The lacquered mirror gloss C100286 finish code points to a high-gloss look, which pairs well with glossy fronts in kitchens, baths, and commercial fixtures where a continuous reflective surface at the edge is important for the finished appearance.
The manufacturer part number 324696-085 gives you a precise identifier when you are matching existing work or following a specified Rehau ABS edgebanding in architectural or shop drawings. Because the SAP description states 15/16X1MM, you can set bander and trimmer tooling around that specific width and thickness, which helps reduce adjustment time between runs. Knowing this is ABS material allows you to use heat and trimming parameters already proven on ABS in your shop, supporting consistent results from one project to the next. The C100286 LAC MIRRGLS designation defines the lacquered mirror gloss surface, which is important when you need the same gloss level every time you reorder for add-on pieces or service replacements. The 600FT length specification supports planning for job quantities, letting you estimate how many linear feet of cabinet edges you can cover from a single coil without interrupting production.
Rehau 324696-085 is an ABS edgebanding identified by Rehau, Inc. as an edge banding product, which is used to cover and finish exposed panel edges in cabinetry and similar work.
This ABS edge banding has a nominal width of 15/16 inch and a thickness of 1mm, allowing coverage of typical panel edges with enough extra for trimming to a flush surface.
The C100286 LAC MIRRGLS code identifies a specific lacquered mirror gloss finish on the ABS edgebanding, which supports matching to high-gloss faces on doors or panels.
The SAP description lists 600FT, indicating a 600-foot length, which supports longer production runs and consistent appearance across multiple cabinet components.
The 1mm ABS thickness provides a defined but not bulky edge, suiting modern cabinet doors, shelves, and case parts where a clean, proportionate profile is desired.
The 324696-085 part number uniquely identifies this 15/16 x 1mm ABS C100286 LAC MIRRGLS 600FT edgebanding, helping repeat the same width, thickness, and finish on future jobs.
The Rehau ABS edgebanding, 324696-085, combines 15/16 inch width, 1mm thickness, ABS material, and a C100286 lacquered mirror gloss finish identified in the 15/16X1MM ABS C100286 LAC MIRRGLS 600FT description. Those specifics support consistent cabinet and furniture edge treatments where matching width, thickness, and gloss level are critical from one project to the next. For shop workflows that already run ABS edge banding, choosing this defined Rehau part number helps align tooling, finish expectations, and material planning to a known standard.
Sold In: 1 Roll