Rehau ABS edgebanding gives you a dedicated edge solution for panel work where an ABS edge is specified. This Rehau, Inc. edge banding is built as part of their ABS program, so it matches ABS-based layouts across jobs. The 15/16 inch width covers standard panel thickness with a bit of tolerance, which helps conceal minor panel size variation along the run. The 1.2 mm thickness adds a solid edge profile, which supports a more substantial feel at the cabinet front. The ABS material forms a defined, machinable edge, so trimming and flushing operations stay consistent from part to part. The Rehau 324848-002 part number ties this roll to the manufacturer specification, helping keep color and finish selections aligned on repeat projects.
This ABS edgebanding uses a 15/16 inch face, giving you coverage over typical panel thicknesses with a margin for trimming, sanding, and flushing. That extra coverage lets you run parts through edgebanders and follow up with manual cleanup without exposing the core. The 1.2 mm thickness creates an edge that reads as a solid strip at the front of cabinets, supporting a defined transition from face to edge. As part of Rehau ABS edge banding, the stock works within standard ABS-focused setups in the shop, so existing handling and machining methods carry over from similar ABS rolls.
This Rehau ABS edgebanding is positioned for woodworking environments that rely on edge banding to close exposed panel edges. The edge banding category ties it directly to cabinet and casework fabrication where sheet goods leave visible cores. The 15/16 inch width matches panels built around that dimension, allowing fabricators to run doors, drawer fronts, and carcass parts through an edgebander set up for that width. The 1.2 mm build is suited to projects where a more substantial edge is desired over ultra-thin tape, offering a bolder line at the front of cabinets. As a Rehau, Inc. ABS product, it fits into jobs where ABS-based edges are part of the material schedule.
The defined 15/16 inch by 1.2 mm format means setups can be dialed to a known edge size, which cuts down on trial runs between batches. That stable dimensioning lets operators hold consistent trimmer and scraper settings from part to part. The ABS construction provides an edge that behaves predictably under cutting tools, supporting clean shearing rather than breaking away unpredictably at the corner. Tying the roll to manufacturer part number 324848-002 helps shops document exactly which edge they used, so future repairs or additions can rely on the same material and keep visual lines consistent. Being classified specifically as edgebanding keeps its role clear in the workflow: it is the material that takes raw panel edges and turns them into finished, usable fronts and sides.
Rehau ABS edgebanding in this model is specified at 15/16 inch width by 1.2 mm thickness, giving coverage for common panel thickness with a measurable edge profile.
Rehau ABS edgebanding at 15/16 inch spans typical panel thickness while leaving a slight overhang, so machining and flushing operations can produce a clean, full-coverage edge.
The 1.2 mm thickness on this ABS edge banding creates a more substantial edge, which supports a defined profile at doors and drawer fronts and aids uniform visual alignment.
Rehau 324848-002 edgebanding is tied to a specific manufacturer spec, so shops can reference the same material when repeating jobs or matching previous cabinet runs.
This product sits in the edgebanding and woodworking supply space, making it suited to closing raw panel edges on cabinet and casework projects using ABS edges.
The ABS material in this Rehau edge banding provides a predictable, machinable edge, so standard edgebanding equipment and trimming setups can be applied efficiently.
This Rehau ABS edgebanding in 15/16 inch by 1.2 mm format gives shops a known edge size tied to manufacturer part number 324848-002. That clear spec lets you match cabinet and casework edges to the same ABS profile across projects.
Sold In: 1 Roll