Rehau ABS edgebanding provides a dedicated edge treatment that covers and protects exposed furniture or cabinet panel cores during fabrication. The 15/16 inch width spans typical panel thickness while allowing a trim margin, so installers can flush-trim to clean, straight edges on casework and doors. The 1.2 mm thickness creates a substantial edge profile, supporting a solid feel on high-use fronts and work surfaces. ABS material forms a stable plastic edge, so the banding maintains its shape along straight runs and outside corners during processing. The CP20984 reference identifies the specific decor match, helping shops align edge color and design with the chosen surface material. The lacquered mirror gloss finish delivers a glossy face on the edge, so high-gloss panels carry that same reflective look right to the perimeter without a visual break. A 328 ft length supports longer production runs and reduces changeovers between pieces.
This 15/16 inch by 1.2 mm Rehau ABS edgebanding is sized for machine or manual application to panel edges in cabinet and furniture construction. The width overlaps both faces of standard panels, so operators can apply it in a single pass, then trim back to a flush, square edge along the panel faces. The 1.2 mm thickness provides enough material for clean trimming without chatter, which supports smooth edges after routing and scraping. ABS material runs well on typical edgebanding equipment, so shops can integrate it into existing workflows for straight edges and simple contours. The lacquered mirror gloss surface presents a finished edge right off the machine, so only trimming and light finishing passes are needed to match the surrounding high-gloss surfaces.
Rehau ABS edgebanding in size 15/16 inch by 1.2 mm is suited for edging furniture and cabinet panels where the core needs to be covered and protected. The width lets fabricators process vertical cabinet ends, horizontal tops, and shelving inside casework while keeping a consistent edge reveal across the job. The ABS strip follows straight carcass edges and door blanks, so it works across common case construction layouts in shops using panel-based components. The CP20984 designation ties this banding to a specific surface decor, which helps production runs stay visually consistent when edging matching fronts, sides, and interior parts built from the same design family. The lacquered mirror gloss finish supports use on high-gloss fronts and panels, so decorative surfaces retain a continuous glossy appearance at every exposed edge.
The 1.2 mm thickness on this Rehau ABS edgebanding gives operators enough material to trim without cutting into the substrate, which reduces rework on finished cabinet and furniture parts. The ABS composition offers a uniform material for routers and edge trimmers, so cutting pressures stay consistent along long edges and multiple panels. The lacquered mirror gloss surface reduces the finishing steps needed after edging because the edge already presents a reflective face that aligns with high-gloss surfaces. The CP20984 decor code allows shops to specify the same edgebanding on repeat orders, supporting color and design continuity across future cabinet or furniture runs. With 328 ft on the roll, production teams can run numerous doors, drawer fronts, and case parts from a single coil, which supports predictable throughput on the edgebander and simplifies planning for runs using this exact decor and finish.
The Rehau 324848-006 ABS edgebanding is 15/16 inch wide and 1.2 mm thick, which supports edging standard panel thicknesses with enough margin for clean trimming on both faces.
The lacquered mirror gloss finish gives the ABS edgebanding a glossy, reflective surface, so high-gloss cabinet or furniture panels maintain a continuous shine across the exposed edges.
The CP20984 code identifies the specific decor of this ABS edgebanding, so fabricators can match the edge appearance to corresponding panel designs within the same visual family.
The 1.2 mm thickness provides a substantial edge, allowing smooth routing and scraping, so cabinet and furniture edges feel solid and finish cleanly after trimming operations.
The 15/16 inch width extends slightly past common panel faces, so installers can flush-trim both sides and achieve straight, even edges without leaving the core exposed.
The Rehau ABS edgebanding roll length is 328 ft, which supports extended cabinet or furniture production runs using the same decor without frequent coil changes.
Rehau ABS edgebanding 324848-006 brings together a 15/16 inch by 1.2 mm profile, ABS construction, CP20984 decor, and a lacquered mirror gloss finish to support high-gloss cabinet and furniture work. The 328 ft roll length suits shops planning consistent runs with this decor. For projects calling for ABS edgebanding that matches high-gloss surfaces and standard panel formats, this configuration from Wurth Baer Supply aligns with panel-based casework, doors, and shelving built around the same design.
Sold In: 1 Roll