Rehau ABS edgebanding identifies this product as an ABS-based edge banding from Rehau, Inc., so it serves as a matching edge treatment on casework, doors, and panels where ABS material is specified. The manufacturer part number 324848-013 ties this specific roll to a defined color and finish family, giving installers a repeatable reference when matching existing jobs or ordering for large projects. The SAP description line 15/16X1.2 ABSLE CP60637 LAC MIRGLS 600FT states that the width is 15/16 inch and the nominal thickness is 1.2 mm, which fits typical 3/4 inch panel constructions while providing a bit of reveal for clean trimming. The ABSLE CP60637 LAC MIRGLS 600FT wording also indicates a CP60637-coded decorative design with a lacquered mirror-gloss surface, so exposed edges present a high-sheen look that aligns with glossy board or laminate designs.
The 15/16X1.2 sizing from the SAP description defines both the working width and thickness, which means installers can set edgebander guides and trimmers for that specific profile and expect consistent results across a full run. The combination of 15/16 inch width with 1.2 mm thickness gives enough material for proper glue-line coverage and post-trimming without leaving a fragile edge, supporting everyday cabinet and furniture applications where panels meet doors, shelves, or finished ends.
The product class Edge Banding confirms that this Rehau ABS piece is intended for covering raw panel edges on cabinetry, furniture, and similar casework. The CP60637 design reference within the 15/16X1.2 ABSLE CP60637 LAC MIRGLS 600FT description points to a specific decorative appearance, guiding its use on projects that rely on that same color standard or a coordinated glossy finish. Because the width is defined as 15/16 inch, it aligns well with projects built from 3/4 inch engineered panels, where a bit of extra width allows installers to trim back to a clean, straight edge. The 1.2 mm thickness supports use on visible fronts, tall pantry ends, or office partitions where a more substantial edge presentation is preferred over thin tape. The mirror-gloss lacquered description suggests applications alongside high-gloss doors, drawer fronts, or panels, helping keep edge reflections consistent across vertical and horizontal surfaces.
The manufacturer name Rehau, Inc. combined with the precise part number 324848-013 gives shops a stable identifier, so future orders reference the same ABS color and finish when adding cabinets or replacing damaged components. The SAP description string 15/16X1.2 ABSLE CP60637 LAC MIRGLS 600FT bundles all critical working details - width, thickness, ABS material, decorative reference, lacquered mirror-gloss surface, and roll length - which supports job planning and machine setup from a single line item. The 600FT length referenced there means a single roll services extended edgebander runs, helping maintain uniform appearance from first part to last on production batches using this same CP60637 design. Because the product is defined as Edge Banding within the Miscellaneous|Edgebanding category, it fits into established edgebanding workflows, from cutting to length through trimming and buffing, using settings appropriate for 1.2 mm ABS material on standard shop equipment.
The Rehau 324848-013 edge banding is described as ABSLE, indicating an ABS-based edgebanding, which fits typical ABS edgebanding machining and trimming processes in cabinet and furniture shops.
The SAP description lists 15/16X1.2, meaning the edgebanding is 15/16 inch wide and 1.2 mm thick, providing overhang for trimming on standard 3/4 inch panels.
The 600FT reference in the SAP description indicates a length of 600 feet, supporting extended runs on edgebanders without frequent roll changes.
The LAC MIRGLS portion of the description indicates a lacquered mirror-gloss finish tied to the CP60637 decorative design, suited to matching high-gloss panels.
This Rehau product is identified by manufacturer part number 324848-013 and the description 15/16X1.2 ABSLE CP60637 LAC MIRGLS 600FT, allowing consistent reorders.
The item is in the product class Edge Banding within the Miscellaneous|Edgebanding category, aligning it with typical edgebanding use on cabinets and panels.
The defined 15/16X1.2 ABSLE CP60637 LAC MIRGLS 600FT specification gives shops a clear profile, finish, and length for planning cabinet or furniture runs. Ordering this Rehau ABS edgebanding by part number 324848-013 through Wurth Baer Supply ties each project to a consistent, repeatable edge detail that matches the CP60637 lacquered mirror-gloss design across current work and future expansions.
Sold In: 1 Roll