Rehau ABS edgebanding 324848-015 is an ABS edge banding designed to finish exposed panel edges on woodworking and cabinet projects, so raw substrate is covered and edges present as a continuous surface. The 15/16 inch width gives coverage across common 3/4 inch panels with margin for trimming, which helps installers achieve a flush edge after running standard edge trimmers. The 1.2 mm thickness provides a substantial edge profile, supporting a more solid feel at the panel perimeter during regular use. The CP41571 mirror gloss lacquer finish creates a high-gloss surface, aligning the edge appearance with matching high-gloss boards where that decor is used in the build. The ABS material identifies this banding as a thermoplastic edgeband, suited to typical edge banding workflows where ABS is required or specified.
The 15/16 inch stated width lets installers size this ABS edge banding against typical panel layouts, so tape tracking and trimming setups can be aligned to that coverage. The 1.2 mm thickness figure sets expectations for trimming and corner breaking, because cutters and scrapers can be set to work that specific material thickness at the edge. The CP41571 mirror gloss lacquer finish identifies the surface as mirror gloss, so handling and edge-processing steps can be organized to protect that high-gloss appearance during installation and adjustment.
This Rehau, Inc. ABS edge banding in the 324848-015 version is positioned for woodworking and cabinet work where ABS edgebanding is specified as the edge solution. The 15/16 inch width matches well with constructions based on 3/4 inch panels, because it provides enough overhang to tolerate panel and saw tolerances before trimming. The 1.2 mm thickness suits applications where a more pronounced edge is desired compared with very thin tape, supporting projects that call for a defined edge line around fronts and cases. The CP41571 mirror gloss lacquer finish aligns the edge with mirror gloss surfaces in the same decor family, which matters when fronts, sides, or visible panels are built from matching mirror gloss materials in the shop.
The combination of 15/16 inch width and 1.2 mm thickness helps installers repeat setups across multiple pieces, because the coverage and edge build remain consistent from run to run. The ABS material designation allows shops already configured for ABS edge banding workflows to treat this banding as part of that same process, keeping machine settings and handling routines aligned with ABS behavior. The CP41571 mirror gloss lacquer finish means the visible edge reflects light like a mirror gloss panel face in the same decor, which supports uniform appearance across cabinet runs and reduces visual distractions at joints. The 600FT length reference allows planning around longer runs of doors or panels from a single coil, helping maintain color and finish continuity over a project that uses this specific 324848-015 banding.
Rehau ABS edgebanding 324848-015 is an ABS edge banding from Rehau, Inc., so it serves as edging to cover and finish exposed panel edges in woodworking and cabinet applications.
The 15/16 inch width provides coverage across typical 3/4 inch panels with extra material, allowing trimming to a flush edge while compensating for small panel or cut tolerances.
The 1.2 mm thickness gives a more substantial edge profile, which influences trimming settings and results in a more defined, solid-feeling edge on finished components.
The CP41571 mirror gloss lacquer finish creates a mirror gloss surface on the banding, helping the edge visually match mirror gloss panels in the same decor on a project.
The ABS material designation identifies it as ABS edge banding, which aligns with equipment setups and project specifications that call specifically for ABS edgebanding.
The 600FT reference indicates a 600 foot length, supporting longer production runs where continuous footage helps maintain consistent decor and finish across many parts.
This Rehau ABS edgebanding 324848-015 combines 15/16 inch width, 1.2 mm thickness, and CP41571 mirror gloss lacquer finish to support panel edge work based on mirror gloss decor. For woodworking and cabinet projects aligned with ABS edge banding in this decor and size, this product provides the specified dimensions and finish needed for consistent, repeatable edging results.
Sold In: 1 Roll