Rehau ABS edgebanding 327874-004 is an ABS edge banding designed to finish and protect exposed substrate edges in woodworking and cabinet projects. The ABS material supplies a uniform, work-friendly band that can be processed with common edgebanding equipment, which helps keep shop setups straightforward on production or custom runs. The 15/16 inch width gives coverage for typical 3/4 inch panels with overhang for trimming, so edges can be dressed flush without exposing core material. The 1mm thickness provides a solid edge that holds its line during machining, supporting consistent profiles and reducing risk of telegraphing from the substrate. The designation CP21148 EMB EMX LAC identifies the specific finish and appearance series, which helps match this band to corresponding surfaces across a job. The 600FT length is suited to longer runs, supporting continuous edging work with fewer material changeovers.
This Rehau ABS edgebanding uses a 15/16 inch width that gives installers extra material beyond standard 3/4 inch boards, so trimming and scraping can bring the edge down precisely to the face without exposing the core. The 1mm thickness offers a balance between a solid edge and efficient processing, which works well with common edgebanding machines and trimmers used in woodworking shops. The ABS edge banding format is suitable wherever an applied band is preferred over exposed substrate, supporting consistent panel edges around cabinet carcasses, shelves, and fronts. With the 600FT length, shops can run multiple components from a single roll, which helps keep setups steady across matching pieces in a project.
This Rehau ABS edgebanding, identified as 327874-004, is a 15/16 x 1mm band intended for edge finishing in woodworking and cabinet environments. The 15/16 inch width provides enough overhang for bonding and trimming on typical 3/4 inch sheet goods used in casework, closets, or built-ins. Because the material is ABS, it aligns with standard edgebanding processes, whether the shop relies on automatic edgebanders or more compact machines. The CP21148 EMB EMX LAC designation ties this roll to a specific appearance family, which is important when project specifications call for a unified look from panel surface through the banded edge. In practice, this format supports edging cabinet sides, doors, and shelves that need a durable, finished perimeter to complement the chosen surface design.
The 1mm thickness of this ABS edge banding helps maintain a straight, defined edge after trimming, which is valuable when doors and drawer fronts are aligned in banks and small inconsistencies become noticeable. The combination of 15/16 inch width and 1mm thickness gives a workable profile for typical woodworking tooling, so trimming, scraping, and light profiling can be completed in a controlled way. With a 600FT roll length, this Rehau ABS edgebanding supports running a full room of cabinetry or multiple smaller jobs while holding the same color and finish across all edges. The specific part number 327874-004 allows shops to reorder the same band for repeat projects, which supports long-term consistency when matching previous installations or maintaining a standard finish line in production.
The Rehau ABS edgebanding 327874-004 is 15/16 inch wide and 1mm thick, which suits edging typical 3/4 inch panels with a trim margin for flush finishing.
Rehau 327874-004 edge banding is made from ABS, giving a thermoplastic band that works with common edgebanding machines in woodworking shops.
The Rehau ABS edgebanding 327874-004 is supplied in a 600FT length, supporting extended edging runs on cabinet and furniture projects.
This 15/16 x 1mm ABS edgebanding is typically used on the exposed edges of panels in cabinet, furniture, and general woodworking projects.
The CP21148 EMB EMX LAC designation identifies the specific finish and appearance series, helping match this edgebanding with coordinated surfaces.
The 1mm thick ABS edge banding offers a solid, defined edge that handles trimming and light profiling well on cabinet doors, sides, and shelves.
Rehau ABS edgebanding 327874-004 brings a 15/16 inch by 1mm format that aligns with common 3/4 inch panel work, giving installers workable overhang for precise trimming. The ABS construction, defined finish designation, and 600FT length support coordinated, repeatable edging across cabinet and woodworking projects. For shops standardizing on a specific edge appearance, the clear part number and dimensional definition make this band a practical choice when planning material lists and scheduling edging runs.
Sold In: 1 Roll