Rehau ABS edgebanding 327875-043 15/16 x 1mm

Rehau ABS Edgebanding 327875-043 For Clean Edges

Rehau ABS edgebanding 327875-043 is an ABS edge banding designed to finish exposed panel and board edges in woodworking projects. The product is identified as ABS edgebanding in the edge banding category, so it covers and protects raw substrate edges on cabinets, furniture, or casework where an ABS trim is specified. The 15/16 inch width stated as 15/16X1MM gives coverage across typical 3/4 inch panels while allowing slight overhang for trimming, which helps installers flush-trim cleanly without leaving chip-out at the edge. The 1mm thickness described in the product designation provides a defined edge profile that stands up to regular handling, which is useful around doors, drawer fronts, and vertical panels that see frequent contact. The manufacturer part number 327875-043 ties this edgebanding to a specific color and finish from Rehau, which supports consistent appearance across repeat projects or field repairs using the same code.

Key Rehau ABS Edgebanding Details For Projects

• The product is identified as ABS edgebanding, so it is intended as an edge treatment on compatible sheet goods, helping installers hide raw core edges and present a uniform ABS surface along visible lines.
• The stated width of 15/16 inch provides coverage beyond the face of standard 3/4 inch panels, giving room to trim both sides back to flush for a straight, even edge on doors and cases.
• The 1mm thickness referenced in the SAP description creates a solid-feeling edge rather than an ultra-thin film, which helps maintain a defined profile along cabinet and furniture edges in regular use.
• The manufacturer designation C100305 describes a specific Rehau configuration, so matching this code allows shops to repeat the same look on future runs or when adding parts to an existing installation.
• The manufacturer part number 327875-043 links color and finish to Rehau documentation, which helps designers and production keep visual continuity across panels, doors, and trim pieces that share this edgeband.

Edgebanding Size And Format For Installation Workflows

The SAP description "15/16X1MM ABS C100305 EMX LAC 600FT" shows this Rehau ABS edgebanding in a 15/16 inch width and 1mm thickness, so it suits panel edges where that size range is standard in the shop. The 600FT reference indicates an extended continuous length, which supports longer production runs or multiple projects from the same roll without frequent changeover during edgebanding operations. Being part of the Edge Banding product class means this material is intended to run through edge banding equipment or be applied as an edge detail, so shops can integrate it into established workflows alongside other Rehau-coded bands.

Using This Rehau ABS Edge Banding In Shop Production

Where This ABS Edgebanding Fits Best

This Rehau ABS edgebanding, identified under the Edge Banding product class, is suited to applications where exposed board edges need an ABS-based finish. The 15/16 inch width described in the SAP line allows coverage of common 3/4 inch substrates with extra margin, so it can be used on cabinet sides, shelves, tops, and doors that follow that core thickness. Because it is ABS edgebanding, it aligns with specifications that call for ABS rather than alternative edge materials, which matters when matching material types across a project or to previous work using Rehau ABS. The manufacturer coding C100305 and part number 327875-043 tie this band to a defined appearance in the Rehau system, so it fits projects where that specific code has been selected in drawings, cut lists, or bill-of-materials schedules. The 600FT length referenced in the description supports runs of multiple cabinets, tall pantries, or longer furniture components from a single coil, which helps keep consistent edge color across all pieces in the job.

Why The Dimensions And Code Support Repeatable Results

The combination of 15/16 inch width and 1mm thickness described in the SAP text gives installers predictable trimming behavior, so the band can be processed with standard edge banding equipment settings tuned to that width and gauge. The 1mm thickness offers a measurable edge build, which helps maintain a straight visual line along door and drawer fronts during repeated production runs using the same setup. The Rehau manufacturer part number 327875-043 and internal reference C100305 act as precise identifiers, so shops can call out the same band on future orders and expect the same edge characteristics wherever that code is used. Being categorized by Wurth Baer Supply under Miscellaneous|Edgebanding and Edge Banding positions this product within established sourcing lists, which streamlines reordering and keeps replacement or expansion work aligned with the original ABS edge selection.

Common Questions About Rehau ABS Edgebanding 327875-043

Select Rehau 327875-043 ABS Edgebanding For Matching Edges

The Rehau ABS edgebanding 327875-043 from Wurth Baer Supply combines a 15/16 inch width, 1mm thickness, and 600FT length in a defined C100305 configuration, so shops can specify one coded band, run consistent edges across a project, and reorder the same material for future work.