Rehau ABS edgebanding 327875-044 is an ABS edge banding designed to finish exposed edges on panels, tying the panel face and edge together for a consistent look and defined border. The 15/16 inch width gives coverage for common panel thicknesses with trim allowance, supporting a clean scribe and final flush cut. The 1mm thickness provides an ABS profile that can be machined, routed, and trimmed in typical edgebanding setups without changing standard workflows. The C600782 designation identifies the specific decor reference, helping match this edging to the intended surface material in a shop system. The Elegmatt LAC description identifies a particular finish and appearance family, so the banding supports color and sheen coordination across multiple panel parts. The 600FT notation indicates this edgebanding is supplied in a length suitable for longer runs or repeated cabinet and furniture components.
This Rehau ABS edge banding uses a 15/16 inch width, giving installers extra material past the panel face so trimming tools can create a flush finished edge without exposing substrate. The 1mm thickness supports standard edgebanding setup, allowing operators to dial in pressure, heat, and trimming based on familiar ABS behavior. The C600782 Elegmatt LAC description identifies a specific finish family, so when this edging is used with the matching decor system it helps keep the joint between face and edge visually consistent across doors, drawer fronts, and casework parts.
This Rehau ABS edgebanding, part number 327875-044, is specified as 15/16 inch wide and 1mm thick, positioning it for projects built on panel stock where a modest overhang is preferred before trimming. On straight cabinet sides, shelving, and furniture parts, this width allows the edging to be centered over the substrate and then trimmed back to flush without leaving gaps. The ABS material is suited to typical edgebanding processes, so operators can run this banding through edgebanders configured for ABS without changing cutting heads or routines. The C600782 Elegmatt LAC designation ties the edging to a defined decor code, supporting coordinated projects where the surface and edges are planned as a system. For casework lines built around that decor, this banding lets shops carry the same look around the full perimeter of each component.
The combination of 15/16 inch width and 1mm thickness gives this Rehau ABS edgebanding a predictable trimming profile, which helps maintain repeatable results from part to part. The extra width beyond typical panel thickness lets trimming units or handheld tools remove minor misalignment while still fully covering the substrate edge. At 1mm, the banding has enough material to hold a defined edge after machining, supporting a controlled radius or slight arris as desired. The clearly defined code C600782 Elegmatt LAC gives planners and programmers a fixed reference when setting up jobs, so the same edging is specified each time that decor is used. With the manufacturer part number 327875-044, purchasing and production share one identifier, helping match the correct ABS edging to the correct panel program.
Rehau ABS edgebanding 327875-044 is specified as 15/16 inch wide and 1mm thick, giving installers trim allowance and a consistent ABS profile for standard edgebanding equipment.
The C600782 Elegmatt LAC description identifies a specific decor and finish family, so this edging can be matched to the corresponding surface material for consistent appearance.
This product is ABS edgebanding, so it is designed as an ABS-based edge material for use in standard edgebanding processes on panel components.
The 15/16 inch width provides coverage with extra margin past typical panel edges, helping trimming tools create a flush finished edge without exposing the core material.
The 1mm thickness gives enough ABS material for stable trimming and routing, supporting a consistent edge profile that works well with standard edgebanding tooling.
The 600FT reference indicates a length suited to longer production runs, helping shops plan repeated cabinet or furniture parts with the same ABS edging.
Rehau ABS edgebanding 327875-044 combines a 15/16 inch width, 1mm thickness, and the C600782 Elegmatt LAC decor code, aligning edge size and finish with coordinated panel work. For cabinet, furniture, or casework runs built around this decor, this ABS edge banding supports consistent edges across multiple parts. Adding this specific Rehau edging to your next project ties panel faces and edges together with a defined size, material, and finish reference.
Sold In: 1 Roll