Rehau ABS edgebanding 327875-114 is an ABS edge banding designed to cover and protect raw panel edges, giving cabinet and furniture components a clean finished look that stands up to regular use in woodworking environments. The 15/16 inch width stated in the SAP description provides coverage for standard 3/4 inch panels with a slight overhang, so edges can be trimmed flush for a precise line along doors, drawer fronts, and casework parts. The 1mm thickness identified in the product description provides a more substantial edge than thin tape-style options, which supports a sturdier edge profile when panels are handled or bumped. The ABS material called out in the description forms a durable plastic edge, so exposed edges are shielded from direct contact with the substrate. The manufacturer part number 327875-114 ties this edgebanding directly to Rehau, Inc., giving shops a consistent reference when matching to existing jobs or repeating a specification.
The 15/16 inch width documented in the SAP description gives installers a small margin on each side of a 3/4 inch panel, which helps when aligning the strip during application and then trimming cleanly to the panel face. The 1mm thickness listed in the product data means the edge has enough body to track well against trimming tools, supporting a more controlled pass when flushing the edging with the panel surface. The ABS material called out in the description forms a consistent plastic edge, which suits common cabinet and furniture panel work where a uniform, machinable edge is needed after bonding. Together, the identified width, thickness, and ABS composition support a repeatable installation sequence from application through trimming and finishing.
The product class listed as Edge Banding places Rehau ABS edgebanding 327875-114 directly in cabinet, furniture, and casework edge finishing workflows, where exposed panel edges need a finished appearance that matches adjacent surfaces. The 15/16 inch width from the SAP description gives enough coverage for standard 3/4 inch panels often used in carcasses, shelves, and fronts, supporting a uniform edge reveal across a run of parts. Because the material is ABS as identified in the description, it serves well wherever a plastic edge is preferred over a raw composite or wood edge, such as along high-touch cabinet doors and drawer fronts. The manufacturer part number 327875-114 links this specific edge banding to Rehau, Inc., which matters when a shop wants to specify the same edge band on repeat jobs or maintain consistency within a project set. The C600894 reference in the SAP description further identifies this particular variant, helping distinguish it from other widths, colors, or thicknesses within a larger edgebanding program.
The 1mm thickness documented in the product data gives the edge banding enough substance to hold a smooth profile after trimming, which contributes to a clean transition between face material and edge in finished cabinets. The 15/16 inch width stated in the SAP description provides a modest overhang on a typical 3/4 inch panel, so installers can focus on straight alignment during bonding and rely on trimming tools to establish the final edge line. The product class Edge Banding and ABS material designation indicate that this strip is meant specifically for edge finishing, which means it integrates naturally into standard panel preparation, bonding, and flush-trimming steps used in woodworking shops. The Rehau, Inc. branding and manufacturer part number 327875-114 tie back to a defined catalog reference, aiding estimators and project managers when specifying this exact edge in drawings, cut lists, and re-order documentation. These identified details help keep edge appearance, sizing, and material type consistent from part to part and from project to project.
Rehau ABS edgebanding 327875-114 is made from ABS material, providing a plastic edge layer over the panel edge, which supports a uniform machined profile in cabinet and furniture work.
Rehau ABS edgebanding 327875-114 has a stated width of 15/16 inch, giving coverage beyond a 3/4 inch panel so the excess can be trimmed back to a precise finished edge.
Rehau ABS edgebanding 327875-114 is identified as 1mm thick, creating a solid edge profile that supports accurate trimming and a defined edge line on doors, drawers, and panels.
Rehau ABS edgebanding 327875-114 is listed under Edge Banding, aligning it with cabinet, furniture, and general woodworking panel edges that need a finished plastic edge surface.
The 15/16 inch width offers slight overhang on 3/4 inch panels, helping installers align the strip quickly and then trim back to a clean, consistent edge across parts.
The Rehau manufacturer part number 327875-114 identifies this specific ABS edgebanding variant, supporting consistent reordering and documentation when repeating or expanding matching projects.
Rehau ABS edgebanding 327875-114 combines a 15/16 inch width, 1mm thickness, and ABS material into an edge banding suited to finishing exposed panel edges in cabinet and furniture work. The defined product class Edge Banding, the Rehau, Inc. branding, and the specific part number 327875-114 all contribute to predictable specification and reordering when standardizing edge details across a shop. For projects calling for a plastic edge treatment on 3/4 inch panels, this identified combination of width, thickness, and material offers a clear, repeatable option to build into cut lists and job planning.
Sold In: 1 Roll