Rehau ABS edgebanding 327875-125 identifies this edgeband as a specific Rehau, Inc. product, which helps match existing jobs or drawings when you need the same appearance on new or repaired panels. The product class of edge banding defines it as trim for covering raw board edges, so it turns exposed substrate into a finished, usable edge on cabinets, casework, or fixtures. The ABS material designation ties this banding to common thermoplastic fabrication methods, which supports standard edgebanding workflows in shop environments. The RH 155001 reference in the description links this item to Rehau's internal series, giving installers and shops a consistent ID when reordering or standardizing across multiple projects. The Platinum Sands naming in the description defines the specific decor tone, so finished edges visually match panels that share the same Platinum Sands design reference.
The 15/16X1MM size reference in the description indicates a nominal 15/16 inch wide, 1 mm thick ABS strip, which aligns with common panel thicknesses and allows slight overhang for trimming during installation. The ABS material designation tells installers they are working with ABS edgebanding, so it suits shop processes built around routing and trimming thermoplastic banding. The 600' figure in the description indicates a long-run length, which supports extended production runs or multiple cabinets without frequent material changeovers. The Rehau, Inc. branding ties this edgeband to a recognized manufacturer of edge banding, so shops standardizing on Rehau products can align this item with their existing Rehau-focused setups.
The category of Edgebanding defines this RH 155001 Platinum Sands 15/16X1MMX600' product as suited for covering exposed panel edges, so it is applied wherever cabinet, casework, or fixture edges need a finished look. The Platinum Sands reference in the description identifies the decor tone, which aligns this edgeband with projects using surfaces that share the same Platinum Sands design language. The 15/16X1MM dimension reference makes this strip appropriate for edging panels where that width gives enough coverage to trim flush while maintaining the intended reveal. The long 600' description detail supports projects that require many linear feet of matching edge treatment, such as full kitchens, commercial casework runs, or multiple similar builds. The Rehau brand reference ties this edgeband into Rehau's broader edge banding program, so shops working within a Rehau-based scheme can keep decor and sizing consistent from job to job.
The manufacturer part number 327875-125 uniquely identifies this specific Rehau ABS edgebanding, which reduces errors when reordering and keeps edge appearance consistent across phased or repeat projects. The RH 155001 descriptor in the SAP description provides an additional reference tag that can be used in internal shop systems for reliable cross-referencing. The ABS material callout signals predictable machining and trimming behavior typical of ABS banding, which supports repeatable results when routing or scraping flush edges. The 15/16X1MM dimension detail offers a clear sizing reference, helping drafters and programmers align edge banding parameters with this width and thickness for efficient production. The Platinum Sands name anchors the visual specification of this edgeband, which matters when maintaining a continuous look across doors, drawer fronts, and cabinet cases that share the same decor selection.
The 327875-125 manufacturer part number identifies this exact Rehau ABS edgebanding variant, which helps buyers and shops reorder the same decor, size, and material for consistent project results.
The RH 155001 Platinum Sands description defines the decor and series reference, which assists designers and installers in matching this edgeband to Platinum Sands surfaces on cabinets or casework.
The 15/16X1MMX600' description indicates a nominal 15/16 inch wide, 1 mm thick ABS edgeband in a 600-foot length, which supports longer runs and sizing alignment in production planning.
The Rehau 327875-125 edgebanding is described as ABS edgebanding, which aligns it with shop workflows and tooling commonly used for machining and trimming ABS edge banding.
The Rehau, Inc. branding associates this edgebanding with Rehau's edge banding program, which supports buyers who standardize on Rehau products across multiple cabinet or casework projects.
The edge banding classification and Platinum Sands description suit applications where exposed panel edges on cabinets or fixtures need a finished trim that matches Platinum Sands-themed surfaces.
The RH 155001 Platinum Sands 15/16X1MMX600' description defines a specific Platinum Sands ABS edgeband, so it aligns with projects that call out that decor across cabinet and casework edges. The 327875-125 manufacturer part number ties directly to this Rehau ABS edgebanding, which simplifies ordering when you need the same width, thickness, and decor repeatedly. The combination of edge banding product class and 15/16X1MM size reference positions this strip for covering exposed board edges where that sizing suits your layouts. For projects built around Rehau, Inc. edgebanding in a Platinum Sands tone, this identified product provides a matched ABS edge treatment across production runs.
Sold In: 1 Roll