Rehau PVC edgebanding provides a PVC edge treatment from Rehau, Inc. that finishes exposed panel edges so parts match the specified design and protect the core material. The product is identified as Rehau PVC Edgebanding, 327875-138, which ties directly to the manufacturer part number for consistent reordering when a job repeats or expands. The SAP description RH 154713 Midnight Dash 15/16X1MMX600' specifies the Midnight Dash designation, giving shops a defined color name to align with panel or laminate choices. The 15/16 inch width in the description indicates coverage across common panel thicknesses and a small overhang for trimming to a clean line. The 1mm thickness in the same description provides a substantial edge profile that stands up to normal shop handling and service. The 600 foot length in the SAP description supports longer production runs or multiple smaller projects from a single roll.
The SAP description RH 154713 Midnight Dash 15/16X1MMX600' defines the working dimensions for this Rehau, Inc. PVC edgebanding, which directly affects layout and setup. The 15/16 inch width gives coverage across typical board thicknesses with room for trim, so equipment can be set to remove a consistent amount of overhang. The 1mm thickness in the same description establishes the edge build, helping shops align trimming and profiling steps with surrounding surfaces and adjacent components. The 600 foot length referenced in the description supports planning for batch runs, because installers can estimate linear footage per job and pull from a single continuous roll. Together, these specified dimensions support repeatable processing and consistent results across cabinets, shelves, and furniture parts.
The SAP description RH 154713 Midnight Dash 15/16X1MMX600' places this product in the Midnight Dash color family, which supports projects where that specific tone is part of the design. Because the product is identified as Rehau PVC Edgebanding, 327875-138 in the product name, it fits applications that call for PVC edge treatment from Rehau, Inc. in that exact reference number. The 15/16 inch width in the description positions this edgebanding for use on panels where a near-1-inch strip covers the edge and allows for trimming, which suits cabinet sides, shelves, and other case components. The 1mm thickness defined in the SAP description makes it appropriate for parts where a defined edge profile is desired rather than a very thin film edge, supporting furniture and cabinetry that see regular handling. The 600 foot length specified allows this same Midnight Dash edge to be carried across an entire project or series of projects using the single identified roll.
The manufacturer part number 327875-138 and SAP description RH 154713 Midnight Dash 15/16X1MMX600' create a clear specification, so shops can call out this exact edgebanding in drawings or job notes and repeat the same selection later. The Midnight Dash color designation anchors the visual aspect, which means when panels or fronts reference that tone, the edge treatment follows the same naming and avoids mix-ups with similar shades. The 15/16 inch width written into the description directly affects setup on edgebanders and trimming stations, giving operators a known starting width and helping maintain uniform reveals across all parts. The 1mm thickness similarly affects how the edge meets the face of the panel, helping achieve an edge that feels substantial and aligned with the rest of the component. The 600 foot length reference gives planners a fixed linear measure, supporting accurate takeoff and reducing interruptions during production because the roll is sized for extended use.
The product uses the Midnight Dash designation in the SAP description RH 154713 Midnight Dash 15/16X1MMX600', giving projects a defined color name to match in specifications.
The SAP description lists 15/16 inch width, which covers typical panel edges and provides slight overhang for trimming to a clean, flush edge during processing.
The SAP description states 1mm thickness, giving parts a defined edge profile that aligns well with cabinetry and furniture components in normal service.
The description RH 154713 Midnight Dash 15/16X1MMX600' specifies 600 feet of PVC edgebanding, supporting longer production runs or multiple projects from one roll.
The product is classified as Edge Banding in the Edgebanding category, so it serves as a PVC edge treatment for panels and similar components.
The brand is Rehau, Inc., so this PVC edgebanding aligns with projects that specify Rehau edge banding products by name or part number.
The SAP description RH 154713 Midnight Dash 15/16X1MMX600' and part number 327875-138 define a specific Rehau PVC Edgebanding, 327875-138 for jobs that call for Midnight Dash. The 15/16 inch width, 1mm thickness, and 600 foot length all appear directly in the description, giving clear parameters for planning cabinet, furniture, or casework production. When a project design or standard references Midnight Dash and Rehau, Inc. PVC edge banding, choosing this identified product keeps the edge treatment consistent with those requirements across new builds and repeat runs.
Sold In: 1 Roll