Rehau ABS edgebanding 327875-143 is an ABS edge banding product that trims exposed panel edges so they present a finished, uniform surface around cabinets, casework, and similar projects. The 15/16 inch width in the 15/16X1MM ABS C100358 EMX LAC 600FT description covers common sheet material thicknesses while leaving working room for trimming, which supports clean, straight edges after machining. The 1mm thickness noted in the SAP description gives a solid edge layer that handles typical shop handling while staying practical for standard edge banding equipment. The ABS material called out in the description provides a consistent edge profile that sands and routes predictably from one job to the next. The 600FT reference identifies a continuous length suited to multi-piece runs, helping one roll carry through a series of matching parts without stopping to change material midstream.
The 15/16 inch width stated in the 15/16X1MM ABS C100358 EMX LAC 600FT description gives enough overhang on standard panel thicknesses to position the Rehau ABS edgebanding 327875-143 accurately before trimming, which helps maintain straight glue lines along cabinet and furniture edges. The 1mm thickness described in the SAP text keeps the edge banding substantial enough to track properly through typical edgebanding machinery while still trimming cleanly with common cutting and flush-trim tools. The ABS material identified in the description maintains a uniform profile during cutting and routing, which supports smooth transitions at corners and panel ends. The 600FT reference in the SAP description allows a continuous feed approach on larger jobs, helping operators set up equipment once and run multiple components in sequence.
The category listing as Edgebanding and the product class of Edge Banding define Rehau ABS edgebanding 327875-143 as trim for exposed panel edges on cabinet and woodworking projects, so it serves where raw substrate needs a finished perimeter. The 15/16 inch width from the 15/16X1MM ABS C100358 EMX LAC 600FT description aligns with common panel build-ups, allowing this ABS edgebanding for cabinets and casework to cover both faces and the core with a single pass. The 1mm thickness in the SAP description positions the material for applications that benefit from a defined edge profile, such as door fronts and visible shelf edges, where a heavier-feeling edge can support everyday use. The ABS material specified in the description works in typical woodworking shop environments, providing an edge that can be machined alongside composite panels during normal cabinet or fixture production.
The explicit 15/16 inch by 1mm sizing in the SAP description gives installers and fabricators a known profile to match against panel layouts, which helps plan trim allowance and machine settings with less trial adjustment across a run. The 600FT length called out in the 15/16X1MM ABS C100358 EMX LAC 600FT description offers enough material to run multiple cabinets or a full bank of panels from a single roll, supporting color and texture continuity from part to part. The ABS designation in the description tells shops they are working with a single, predictable material, so trimming, routing, and edge finishing steps can be repeated with the same approach on every piece. The clear manufacturer part number 327875-143 and the WBSC - 1432 - RU327875-143 web description allow shops to reference one specific Rehau ABS edge banding when reordering, which supports consistent results on repeat jobs and service work.
Rehau ABS edgebanding 327875-143 is an edge banding product for finishing exposed panel edges, giving cabinet and woodworking projects a uniform, finished perimeter.
The SAP description 15/16X1MM ABS C100358 EMX LAC 600FT specifies a width of 15/16 inch and a thickness of 1mm, providing trim allowance and a defined edge profile.
The SAP description notes 600FT, giving a 600-foot length that supports longer production runs and multiple matching parts from one continuous roll.
The description identifies the product as ABS, so the edgebanding uses ABS material that machines consistently with standard shop tools.
The 1mm thickness creates a substantial edge layer that trims and sands to a defined profile, supporting clean lines on cabinet doors, panels, and shelving.
The 15/16 inch width covers standard panel edges with extra margin, allowing alignment and trimming that leave the core hidden and the edge uniform.
Rehau ABS edgebanding 327875-143, defined by the 15/16X1MM ABS C100358 EMX LAC 600FT description and manufacturer part number 327875-143, provides a 15/16 inch wide, 1mm thick ABS edge solution in a 600-foot length for finishing exposed panel edges. These defined dimensions and the ABS material give shops a known profile to set up against panel thickness and machining steps, supporting consistent results across cabinets and casework runs. For projects that call for a repeatable ABS edge banding roll from a named manufacturer, this Rehau ABS edge banding offers a clearly identified option to match in current and future work.
Sold In: 1 Roll