Rehau ABS edgebanding 327875-150 15/16 x 1mm

Rehau ABS Edgebanding 327875-150 For Clean Edges

Rehau ABS edgebanding 327875-150 is an ABS edge banding product from Rehau, Inc. that covers and finishes exposed board edges, giving casework, shelving, and panels a uniform, finished look around the perimeter. The 15/16 inch width provides coverage across standard panel thicknesses with a margin for trimming, so cut edges are fully hidden once applied and flushed. The 1mm thickness gives the band a substantial profile, helping the edge resist minor impacts in everyday use and reducing visible telegraphing from the substrate. ABS material delivers a consistent, machinable plastic edge that works well in typical woodworking shop environments where panels are cut, edgebanded, and trimmed. The manufacturer part number 327875-150 identifies this specific configuration for reordering or matching existing installations that already use this exact band. The SAP description 15/16X1MM ABS C100350 EMX LAC 600FT defines the size and construction in a concise format for job planning.

Key Rehau ABS Edge Banding Work Advantages

• The 15/16 inch width covers the face of common panel thicknesses with room for trimming, so installers can route or scrape back to a clean, flush edge without exposing substrate or leaving narrow glue lines at the corners.
• The 1mm ABS construction creates a solid edge banding strip that can be machined, trimmed, and finished as part of regular shop workflow, giving edges a consistent profile once processed with standard edgebanding equipment.
• ABS material in this edge banding provides a stable plastic edge surface that accepts normal shop handling, supporting fabrication of cabinets, fixtures, and panels where a uniform synthetic edge is preferred over raw board.
• The Rehau brand and part number 327875-150 give a clear reference for matching this ABS edgebanding to existing runs, simplifying repeat orders when a project, customer standard, or prototype was built using the same edge band.
• The descriptor C100350 EMX LAC in the SAP description helps distinguish this band from other ABS edgebanding options in inventory systems, so shop staff can pull the correct roll for a run without confusion or downtime.

Edgebanding Dimensions And Practical Fit Details

This Rehau ABS edge banding is identified as 15/16X1MM ABS C100350 EMX LAC 600FT, so each strip is 15/16 inch wide and 1mm thick along the roll. That width gives coverage across the thickness of common panel materials while leaving some overhang for trimming, which supports clean routing or scraping passes after the band is applied. The 1mm thickness provides a noticeable but manageable edge, allowing flush trimming tools and profile bits to cut accurately without feeling overly delicate during machining. The 600FT reference in the description indicates the roll length for planning runs, so shops can align production batches, estimating how many straight edges or cabinet parts can be processed from a single roll before changeover.

Using This ABS Edgebanding In Woodworking Projects

Where Rehau ABS Edgebanding 327875-150 Works Best

This Rehau ABS edgebanding is part of the edge banding product class, so it is suited to covering exposed edges on panels used in cabinets, fixtures, and other woodworking assemblies. The 15/16 inch width allows it to span the edge of typical panel constructions with some tolerance for saw kerf variation, so even slightly out-of-square cuts can still be edged and trimmed back to a clean line. Being 1mm thick, this band supports applications where the edge is handled regularly, such as cabinet doors or shelf fronts, because the thicker ABS profile presents a defined surface at the corner. In a woodworking shop supplied by Wurth Baer Supply, this type of banding fits into runs where panels are cut to size, then passed through edgebanders and trimmers as part of a repeatable process.

Details That Support Consistent Edge Banding Results

The ABS material in this edge banding provides a predictable surface for trimming tools, so knives, routers, or scrapers can cut the overhang back to the panel without chipping at normal feed speeds. The 1mm thickness gives enough material for these tools to engage without tearing, helping maintain straight, smooth edges along the length of cabinet parts. The 15/16 inch width offers margin on both faces of the panel, letting operators focus on steady feeding rather than holding a perfectly centered strip. The specific designation C100350 EMX LAC and part number 327875-150 allow shops to call out this exact band in job notes, so subsequent runs or field replacements use the same edgebanding, keeping visual and dimensional consistency across all exposed edges in the project.

Common Questions About Rehau ABS Edgebanding 327875-150

Select Rehau ABS 327875-150 For Defined Panel Edges

This Rehau ABS edgebanding, defined as 15/16X1MM ABS C100350 EMX LAC 600FT, combines a 15/16 inch width with 1mm thickness to support reliable trimming and edge definition on cabinet and panel work. Using the part number 327875-150 when specifying or reordering keeps material consistent across projects, so exposed edges align in both dimension and appearance. For woodworking operations sourcing through Wurth Baer Supply, this ABS edge banding fits directly into panel processing lines that rely on repeatable, clearly identified materials for every production run.