Rehau ABS edgebanding gives you a defined, finished edge using an ABS-based strip matched to code C600731, so you can carry a consistent look across panels in the same project. The 15/16-inch width covers standard panel thicknesses with a bit of overhang, allowing flush trimming for a tight, precise edge. Its 1.2 mm thickness adds a noticeable edge profile compared to thin tape, which supports a more substantial feel on doors, drawer fronts, or carcass edges. The edgebanding is supplied under manufacturer part number 327877-013, so shops already specifying that code can align purchasing directly to drawings and cut lists. The product is identified in the description as ELGMAT LAC, indicating an elegant matte look that helps reduce surface glare along the panel edge and supports a modern, low-sheen appearance in cabinetry or furniture runs.
This ABS edge banding in 15/16 x 1.2 sizing gives you a workable balance between coverage and material usage on standard casework and front components, so you can process runs without excess waste at the trimmer. The thickness works well where you want an edge that reads as intentional rather than minimal, such as higher-touch cabinet fronts. With the ELGMAT LAC identification, the banding is defined as an elegant matte option, so your finished edges visually match low-sheen panel designs built around the same reference. The 328 ft length gives shops and serious DIY users enough material to handle multiple cabinets or a full room of casework from a single run, which supports consistent appearance across all finished edges in that project.
This Rehau ABS edgebanding, categorized as edge banding under the Miscellaneous|Edgebanding class, fits naturally into cabinet and furniture workflows that call for an ABS edge solution. The 15/16-inch width works on typical panel thicknesses used in casework, so it suits cabinet sides, shelves, and vertical partitions where a single pass can cover both faces before trimming. The 1.2 mm thickness suits doors and drawer fronts where a bolder edge line matches the design intent or existing specifications. Because it is identified by the C600731 ELGMAT LAC description and manufacturer part number 327877-013, it serves well in production environments that specify materials by code, letting purchasing, engineering, and the floor speak the same language. The 328 ft length supports batch production, so once the edgebander is set to this profile, multiple components can be processed before changing material.
The clearly defined size of 15/16 x 1.2 helps maintain repeatable setup on the edgebander, since operators can rely on a consistent band thickness and width when dialing in pressure, trimming, and scraping. That consistency supports cleaner seams along the substrate and reduces the need for rework when matching existing panel runs. The ABS material description means the banding aligns with process expectations for ABS-based edge treatment, so temperatures, feed rates, and finishing steps can be standardized around that material type. The C600731 ELGMAT LAC callout links the edge visually to a known elegant matte reference, helping the finished components maintain the same look across replacements or expansions of existing installations. Using the Rehau part number 327877-013 in shop documentation simplifies later sourcing, because the exact edge material can be pulled again when additional cabinets or service replacements are required.
This Rehau ABS edgebanding uses ABS as the base material, which works with typical ABS edge banding processes in cabinet and furniture production.
The 327877-013 ABS edgebanding is 15/16 inch wide, giving coverage past both faces of common panels for clean trimming on cabinet and furniture edges.
This Rehau ABS edge banding has a 1.2 mm thickness, giving a more substantial finished edge profile suitable for doors, drawer fronts, and casework.
The C600731 ELGMAT LAC description identifies an elegant matte style, helping the edgebanding visually align with low-sheen panel designs using the same reference.
This ABS edgebanding is described with a 328 ft length, providing enough continuous material for extended cabinet or furniture production runs.
The 327877-013 part number ties directly to this specific Rehau ABS edgebanding, so project specs and reorders can match the exact edge material every time.
This Rehau ABS edgebanding in 15/16 x 1.2 sizing, identified as C600731 ELGMAT LAC with part number 327877-013, lines up well with cabinet and furniture workflows that rely on coded materials. Adding this 328 ft roll to your next order lets you run edges to the same ABS size, appearance reference, and manufacturer code across current jobs and future follow-up work, supporting consistent results from panel to panel.
Sold In: 1 Roll