Rehau ABS edgebanding 327877-020 15/16 x 1.2

Rehau ABS Edgebanding 327877-020 For Clean Panel Edges

Rehau ABS edgebanding 327877-020 provides an ABS edge banding solution that finishes exposed board edges, so cabinet and furniture panels present a uniform, professional edge instead of raw core material. The 15/16 x 1.2 profile from the SAP description 15/16X1.2 ABSLE C600705 ELGMAT LAC 328FT matches common panel thickness allowances, giving you enough overhang for trimming while still tracking well through standard edgebanders. The ABS material described in the SAP description supports modern edgebanding workflows where thermoplastic edges are preferred around cabinet and furniture components. The C600705 reference in the SAP description ties this edgebanding to a defined design code, which helps match this edge to corresponding decorative surfaces in shop planning. The ELGMAT LAC notation in the SAP description indicates an elegant matte lacquer-style surface, so finished edges visually align with low-sheen panel faces in the same design family.

Key Edgebanding Details For Shop Use

• The ABS material from the SAP description 15/16X1.2 ABSLE C600705 ELGMAT LAC 328FT works well in woodworking environments where thermoplastic edges are applied to panels, supporting repeatable cabinet and fixture production runs.
• The 15/16 x 1.2 dimension in the SAP description sets the banding width and thickness, giving operators a predictable trim allowance around typical panel thicknesses so edges can be flushed and profiled consistently.
• The C600705 design code in the SAP description identifies a specific decor reference, helping shops keep color and design selections organized across panels, fronts, and matching edges during project planning.
• The ELGMAT LAC notation in the SAP description indicates an elegant matte lacquer-style appearance, allowing edges to visually coordinate with low-gloss or lacquer-look surfaces in the same design combination.
• The 328FT length specified in the SAP description defines a continuous roll length that supports longer production runs on edgebanders, reducing changeovers when banding multiple components in the same program.

Edgebanding Size And Surface Details For Application

The 15/16 width referenced in the SAP description 15/16X1.2 ABSLE C600705 ELGMAT LAC 328FT gives you edge coverage that suits boards commonly used in cabinetry, so the banding slightly overhangs for post-trimming while still feeding reliably. The 1.2 thickness in the same description defines a solid-feeling edge profile that responds predictably to trimming and scraping operations in a standard edgebanding workflow. The ABSLE and ELGMAT LAC portions of the SAP description combine ABS material and an elegant matte lacquer-style look, so the edge presents a modern, low-sheen finish that visually supports coordinated panel designs. The 328FT length called out in the SAP description provides a defined run length that fits well with batch production planning on edgebanders.

How This Rehau ABS Edgebanding Fits Shop Work

Using This Edge Banding On Cabinet Panels

This Rehau, Inc. product is classified as edge banding in the Edgebanding category, so it is intended for covering exposed edges on cabinetry, furniture, and related panel constructions in woodworking shops. The 15/16 width from the SAP description 15/16X1.2 ABSLE C600705 ELGMAT LAC 328FT positions the banding to work with typical casework and door components where panels fall slightly under the banding width, giving room for trimming. Because the material is specified as ABS in the SAP description, this edgebanding integrates into automated or manual edgebanding setups that are already configured around thermoplastic edges on wood-based substrates. The C600705 design reference in the SAP description gives specifiers a way to align this banding with specific decorative laminates or surfaces that share the same code, helping maintain visual continuity across doors, drawer fronts, and cabinet cases.

Details That Support Repeatable Edgebanding Results

The 1.2 thickness called out in the SAP description 15/16X1.2 ABSLE C600705 ELGMAT LAC 328FT defines how this edge behaves under trimming and scraping knives, contributing to a consistent reveal along cabinet and furniture edges. The ELGMAT LAC notation in the same description signals an elegant matte lacquer-style appearance, which helps reduce glare on edges and keeps the visual transition between face and edge subtle on low-sheen projects. The 328FT length stated in the SAP description supports longer continuous runs on edgebanding equipment, which can reduce interruptions when producing multiple components in the same decor. The Manufacturer Part # 327877-020 and the Web description reference WBSC - 1432 - RU327877-020 allow shops to specify and reorder the identical Rehau ABS edgebanding 327877-020 when matching previous work, supporting consistent results across repeat jobs.

Common Questions About Rehau ABS Edgebanding 327877-020

Select Rehau 327877-020 For Coordinated ABS Edges

The Rehau ABS edgebanding 327877-020 combines ABS material with a 15/16 x 1.2 profile and an elegant matte lacquer-style appearance, giving woodworking shops a defined edge solution for cabinetry and furniture. The C600705 design reference and 328FT length from the SAP description 15/16X1.2 ABSLE C600705 ELGMAT LAC 328FT support coordinated projects and efficient runs when matching decor-coded panels. Choosing this Manufacturer Part # 327877-020 from Wurth Baer Supply aligns ordering, application, and repeat work around a single, consistent ABS edge banding specification.