Rehau ABS edgebanding 327877-112 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges for woodworking and cabinet projects, so cut board edges gain a consistent, professional-looking surface along the entire run.
The 15/16 inch width stated in the description gives coverage past typical 3/4 inch panels, allowing trimming back to a tight, flush line on both faces for a controlled finished edge.
The 1.2mm thickness described in the SAP description provides a substantial edge layer, which supports a solid feel on doors, drawer fronts, and casework edges once trimmed and finished.
The LE C600896 EMX LAC designation in the description identifies the specific color and finish reference within the Rehau ABS lineup, helping match this banding to coordinating surfaces across a project.
The 600FT length noted in the description indicates this is supplied as a long run, which supports continuous edging on multiple parts in larger jobs while maintaining the same material and finish identity.
The 15/16 inch width from the description gives coverage beyond common panel thicknesses, which lets installers overhang slightly and trim back for a straight, tight edge along the panel surface.
The 1.2mm thickness noted in the SAP description provides an edge band that can be processed with standard trimming methods, which supports a uniform reveal along cabinet doors, drawer fronts, or case edges.
The ABS material, specified in the product name and category, defines a plastic-based edge surface, so machining and trimming behavior stays consistent with other ABS components on the same build.
The 600FT length referenced in the description offers a continuous supply of the same part number, helping sequential parts in a job share the same edge material from start to finish.
The product name and class confirm this is Rehau ABS edgebanding, so it is intended to cover raw board edges in woodworking and cabinet applications where a defined ABS finish is required along the edge.
The 15/16 inch width described in the SAP text gives installers working with standard casework panels enough material to span both the edge and slight overhangs, which supports flexible trimming approaches on verticals and horizontals.
The 1.2mm thickness in the description sets an edge profile that balances material presence with ease of machining, so trimming and finishing steps can remain predictable from one door or panel to the next.
The LE C600896 EMX LAC identification indicates a specific finish reference inside the Rehau ABS system, which matters when the same finish is used on multiple components and a consistent appearance across all exposed edges is needed.
The 600FT length, clearly noted in the description, supplies a long run of identical material under part number 327877-112, so repetitive cabinet parts, shelves, or partitions can be processed with the same edge band without switching rolls.
The Rehau, Inc. brand named in the product data connects this edgebanding to a defined manufacturer, which helps align it with other Rehau-coded materials identified by similar part and finish codes on a project schedule.
The 15/16 inch width called out in the SAP description leaves margin beyond typical board thickness, which is useful when panels vary slightly, because there is still enough band to trim to a flush, straight edge line.
The 1.2mm thickness identified in the description creates a measurable edge layer, so routed or trimmed edges show a consistent band presence rather than a feather-thin film, which can support a more defined edge profile.
The ABS designation in the product name defines the base material family, which keeps edge performance aligned with other ABS components where similar behavior during cutting and trimming is important for repeatable results.
The LE C600896 EMX LAC code linked to this part number distinguishes it from other Rehau ABS options, which matters when shop drawings or cut lists specify that exact finish reference for all exposed edges.
The 600FT length stated in the SAP description gives a clear sense of available run length per unit, so planning edge operations over many panels can be tied directly to that continuous supply of Rehau ABS edgebanding 327877-112.
The manufacturer part number 327877-112, shown in the product data, uniquely identifies this specific combination of width, thickness, material, and finish code, which helps keep ordering and shop usage aligned to the same defined edge solution.
Rehau 327877-112 edgebanding is described as ABS in the product name and SAP text, so the edge surface is based on ABS material for projects built around that substrate.
Rehau ABS edgebanding 327877-112 is identified as 15/16 inch wide in the SAP description, giving coverage past typical 3/4 inch panels for trimming back to a flush, clean edge.
This ABS edge banding is listed as 1.2mm thick in the SAP description, providing a noticeable edge layer that can be machined and trimmed consistently across components.
The SAP description shows a 600FT length, so one unit supplies a long, continuous run of the same Rehau ABS edgebanding 327877-112 for extended edging work.
The LE C600896 EMX LAC text in the description identifies the specific finish reference within the Rehau ABS range, supporting consistent appearance wherever that code is specified.
Manufacturer part number 327877-112 uniquely identifies this Rehau ABS edgebanding configuration, helping ordering and shop use stay aligned to the same defined edge material.
Rehau ABS edgebanding 327877-112 combines a 15/16 inch width and 1.2mm thickness, as described in the SAP text, to deliver a defined ABS edge layer suited to finishing exposed panel edges in coordinated woodworking and cabinet projects.
The LE C600896 EMX LAC identification and manufacturer part number 327877-112 tie color and finish to a specific Rehau reference, so repeated orders and shop use can follow the same clearly documented ABS edgebanding choice.
Sold In: 1 Roll