Rehau ABS edgebanding 327877-115 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so cut sheet goods present a clean, unified surface. The 15/16 inch width stated in the description gives coverage across typical panel thicknesses with a margin that helps hide small alignment variations. The 1.2mm thickness noted in the SAP description provides a substantial edge profile that can handle normal shop handling while giving enough material for trimming and light profiling. The ABS material designation supplies a consistent synthetic edge that pairs well with modern woodworking materials where a uniform band is needed. The reference to LE C600897 EMX LAC identifies the specific decorative match and surface execution so multiple runs on the same job maintain the same appearance. The 600FT length noted in the SAP description supports longer production runs or multiple cabinet projects from a single roll.
The 15/16 inch width listed in the SAP description gives fabricators a useful overhang beyond common panel thicknesses, which helps during banding application because there is material to trim flush without exposing the core. The 1.2mm thickness defined in the same description creates an edge that behaves predictably through trimming operations, since the material depth is substantial enough for a controlled cut yet not so heavy that it resists standard edgebanding tools. The ABS designation provides a consistent synthetic substrate, so cutting, trimming, and finishing steps interact with the banding in a repeatable way across multiple parts in the same run.
This Rehau ABS edgebanding, identified as manufacturer part 327877-115, belongs to the Edge Banding product class and Edgebanding category, placing it within common woodworking and cabinet edge finishing workflows. The 15/16 inch width recorded in the SAP description suits panels that need a slight overhang on both faces, which is typical for cabinet sides, shelves, and casework components using standard thickness sheet goods. The 1.2mm thickness stated in the description provides a noticeable but manageable edge that works well where a defined band line is part of the finished appearance. The ABS material reference signals a synthetic band that aligns with many laminate and engineered panel applications where consistent color and texture around the perimeter is important.
The notation LE C600897 EMX LAC in the SAP description identifies a specific decorative and surface configuration, which matters when components like doors, drawer fronts, and cabinet ends must visually coordinate. By using the same 327877-115 part number wherever this edge look is required, shops can keep front edges, side panels, and interior faces tied to one defined banding choice. The 600FT length called out in the description supports this approach on larger or repeated jobs, since the extended roll length allows multiple components to draw from a single continuous run of the same banding specification.
The ABS designation in the description gives installers and fabricators a predictable material for cutting and trimming, which supports consistent results when the same tooling settings are used across many parts in a project. The 1.2mm thickness noted in the SAP text contributes to this consistency because it creates enough edge depth for tools to track along without tearing through to the substrate during routine trimming. The 15/16 inch width listed in the same description adds further margin by providing extra material on both faces, allowing the trimmed edge to line up with the panel surface rather than relying on exact band centering.
The specific part number 327877-115 and LE C600897 EMX LAC reference work together as a repeatable specification, so a shop can standardize on this banding whenever that defined look is required. This reduces variation in edge appearance between separate production runs that all use the same Rehau ABS edgebanding 327877-115. The 600FT roll length described in the SAP text supports this repeatability because longer runs can be completed without changing to a different lot, helping edges on cabinets, fixtures, or casework panels retain the same visual character from piece to piece.
Rehau 327877-115 edgebanding is described as ABS in the SAP text, giving fabricators a synthetic edge material that works predictably with standard edgebanding tools and finishing steps.
The SAP description lists the banding as 15/16 inch wide, providing slight overhang on typical panel thicknesses so trimmed edges can be brought flush with the panel faces.
The SAP text states a 1.2mm thickness, giving a substantial edge that responds well to trimming while creating a defined band line on doors, shelves, and cabinet panels.
The LE C600897 EMX LAC reference in the SAP description identifies the specific decorative and surface configuration so repeated orders keep the same edge appearance across projects.
The SAP description specifies 600FT, allowing longer production runs or several related jobs to use the same banding specification without changing rolls frequently.
Rehau 327877-115 is listed under the Edge Banding product class and Edgebanding category, aligning it with typical woodworking and cabinet edge finishing applications.
Rehau ABS edgebanding 327877-115 combines a 15/16 inch width, 1.2mm thickness, and ABS construction as documented in the SAP description to deliver a stable edge profile for woodworking projects. The LE C600897 EMX LAC reference and 600FT length create a repeatable specification for shops that want consistent edging across multiple panels and related jobs. Choosing this defined Rehau, Inc. part number lets fabricators align their edge treatment with a clear, documented banding configuration.
Sold In: 1 Roll