Rehau ABS edgebanding 327877-117 is Rehau, Inc. edge banding designed to finish exposed panel edges with a consistent ABS surface. The product is identified as 15/16X1.2MM ABS LE C600898 EMX LAC 600FT, so it provides a 15/16 inch wide strip at 1.2mm thickness, which matches common board thicknesses and allows an installer to trim flush without excess waste. The ABS material classification means the banding uses acrylonitrile butadiene styrene, giving a stable plastic edge that supports modern cabinet and furniture constructions. Being part of the Edgebanding product class, it fits directly into standard edgebanding workflows on casework, shelving, and similar projects where raw substrate edges are exposed and need a consistent finished appearance.
The stated 15/16X1.2MM dimension gives installers a clear sense of how this Rehau ABS edge banding will sit on a panel, since the width slightly exceeds many core thicknesses and the 1.2mm gauge provides enough material for a precise trim pass. The ABS designation in the product name signals that machining operations such as trimming and flushing can be coordinated around the behavior of ABS plastics, helping shops keep setup consistent between runs. With the item defined as edge banding in the Edgebanding category, it aligns directly with standard banders or manual edging workflows focused on covering raw board edges.
The brand listing as Rehau, Inc. positions this product within a recognized line of ABS edgebanding used on cabinets, furniture, and casework, so it fits naturally into projects that already rely on ABS edges. The 15/16 inch width specified in the SAP description works well on jobs using common sheet goods where the finished thickness is around three quarters of an inch, giving enough extra material on each side for trimming. At 1.2mm thickness, the edge banding creates a noticeable yet manageable edge that suits vertical cabinet ends, shelves, and tops where a defined edge profile is part of the design. Because the item is categorized as Edge Banding under Edgebanding, it belongs in workflows focused on hiding exposed substrate on panels.
The manufacturer part number 327877-117 provides a precise identifier, which supports shops that document materials by part number on cut lists or job tickets, helping each run of cabinets or fixtures use the same ABS edgebanding specification. The SAP description reference C600898 EMX LAC 600FT gives an internal description that can be associated with project estimating and ordering systems, so production teams can align this edge material with the rest of the panel components. With the web description WBSC - 1432 - RU327877-117 tying directly to Wurth Baer Supply, buyers can connect this ABS edge banding with established supply chains for ongoing cabinet or millwork programs.
The declared 15/16X1.2MM sizing allows an installer to balance coverage and machining, since the width overhang helps prevent shy edges while the 1.2mm thickness offers a firm edge that responds predictably during flush trimming. Using ABS as identified in the product name and SAP description affects how the edge interacts with cutting, scraping, and sanding tools, so shops can tune their edgebander or hand tools around ABS behavior and expect consistent results from batch to batch. The Edge Banding classification within the Edgebanding category confirms that this product is intended specifically for closing panel edges, anchoring it in a defined part of the fabrication sequence.
The Rehau, Inc. brand naming gives context about the manufacturing source, which helps operations that standardize on particular suppliers for matching finishes and long-term projects. The explicit manufacturer part number 327877-117 and the internal WBSC - 1432 - RU327877-117 identifier support traceability, so replacement runs or service work can use the same ABS edgebanding reference without re-selection. For woodworking shops served by Wurth Baer Supply, having this edge banding documented under these exact identifiers supports repeatable procurement and consistent material planning across cabinets, fixtures, or architectural millwork that rely on ABS edges.
Rehau ABS edgebanding 327877-117 is specified as 15/16X1.2MM, meaning it uses a 15/16 inch wide strip at 1.2mm thickness, which suits many panel edges needing a trim allowance.
Rehau ABS Edgebanding, 327877-117 is described as ABS in the SAP description, indicating an acrylonitrile butadiene styrene edge material used for plastic edging applications.
The 1.2mm thickness stated in the description provides a solid edge profile that supports trimming and light profiling, which helps create a defined, durable edge line on panels.
This ABS edge banding is associated with Rehau, Inc., as listed in the product data, placing it within the Rehau line of edgebanding materials for woodworking projects.
The product is classified as Edge Banding in the Edgebanding category, aligning it with materials specifically used to finish exposed edges of panels and casework components.
The 327877-117 manufacturer part number uniquely identifies this Rehau ABS edgebanding, helping buyers match the same edge material across orders and documented jobs.
Choosing Rehau ABS edgebanding 327877-117 with its defined 15/16X1.2MM sizing and ABS composition lets you align panel edge work with a clearly specified edge banding product. The Edge Banding classification and Rehau, Inc. branding support integration into established cabinet or millwork workflows. Using the 327877-117 and WBSC - 1432 - RU327877-117 identifiers through Wurth Baer Supply ties your edging choice to consistent sourcing for ongoing production runs.
Sold In: 1 Roll